NOS Bondhus & Zephyr 28pc Bit Sets for $7ish

[catalytic]

http://www.ebay.com/itm/321994141783


$10.99 or best offer... My offer of $14 for 2 sets was just accepted.

Bits are made by Zephyr for Bondhus. Pretty much the only other place to get Zephyr bits is straight from Snap-On where they're a few dollars per bit.

(I know there is an Ebay thread, but those tend to be for one-offs whereas this ad has many available.)

 

[pescados666]

They took my offer of $8.50 a while ago

 

[Buckgnarly]

I got a set for 8 about two weeks ago, damn nice set for 8 bucks shipped!

 

[pauls_workshop]

Thanks for the heads up on this one. I may get a set of these. Look good. He also has a bunch of other Zephyr bits up too. - Paul

 

[tjpavlov]

Sent an offer in at $8. Thanks for the heads up!

 

[trialrun]

put in an offer on the Zephyer handles as well

 

[Spn1025]

The screwdrivers look like Kleins. Does Zephyr make them for Klein? or vise versa

http://www.ebay.com/itm/Lot-2x-Zeph...779070?hash=item3d10f94e7e:g:P3EAAOSwKtlWtSY1

 

[swoyer]

Those bit handles are sweet! Put in an offer on bits and some handles.

 

[outdoorspace]

They took my offer of $8.50 a while ago

I got a set for 8 about two weeks ago, damn nice set for 8 bucks shipped!

What type of retention do the socket bit adapters use?

 

[Buckgnarly]

What type of retention do the socket bit adapters use?

Do not have them with me, but snap ring IIRC.

 

[tjpavlov]

Offered $8, he countered me at $9. I took the deal. Sweet deal... thanks OP

 

[OSULemon]

Offered $8, he countered me at $9. I took the deal. Sweet deal... thanks OP

Same. Thanks OP!

 

[bryan750]

Got in at $8.00 thanks for the heads up.

 

[PureLeaf]

Turned down my offer of 7 dollars and offered 9. I declined.

 

[SweetD]

Got in at $8.50 for the bits, and also $8.50 for the driver 2-pack. Good deal, thank you OP!

 

[Spn1025]

Are you guys talking about the yellow handle drivers?

 

[bryan750]

yep,I got the yellow handle driver and the screwdriver 2 pack and bit set for $8.00 each,I can't wait to try them out because I haven't got to try any zephyr products yet.

 

[Tellingthem]

I'm pretty sure those yellow Zephyr sixpac drivers were made by Picquic of Canada.

 

[SweetD]

I'm pretty sure those yellow Zephyr sixpac drivers were made by Picquic of Canada.

Yes I agree...

 

[Spn1025]

He accepted my offer $7.50 for the bit driver handles.

 

[Tinner]

I got 2 sets for $16. Thanks to Catalytic for posting this great deal.

 

[Tuc04]

I didn't get the set mentioned, but bought some other bits from the same seller for about 1/4 of the price as Snap On.

Thanks OP for pointing out the seller.

 

[bdresch]

I got a set for $9. Thanks! I've been looking for a good set to go with my Craftsman Professional bit handle!


Sent from my iPhone using Tapatalk

 

[weg_guy]

I send him a offer of $9 16 hours ago and have not heard anything back from him. I hope they don't sell out before I get one. Anyone else put in for a offer recently and have him accept it?

 

[B_Bimmer]

I sent all kinds of offers a couple hours ago, they just all got accepted. I'm looking forward to them, should be set for a while.

 

[pauls_workshop]

Question for you guys familiar with these: How about 1/4" impact driver use? Would they hold up or not for any light impact use? - Paul

 

[weg_guy]

He finally accepted my offer of $9 for one. He must have just been busy.

Looking forward to using them at work

A screaming deal thanks for the tip!

 

[Daniel831]

Awesome deal. Always on the hunt for quality bits w/o breaking the bank. Was stoked on the yellow handle drivers until I noticed in his pictures that they have no bits included.

 

[kunkernator]

FWIW, McMaster Carr sells Zephyr bits. They do not list the brand, but rest assure they are Zephyr. That is where I buy all mine from.

Either way, this is still a great deal.

 

[PureLeaf]

Seems lowest he would go for quantity of 1 was 9 dollars, and for qty of 2 is 8 dollars per unit.

 

[Daniel831]

He went $6.75 for 5 sets.

on another note can anyone well me what this is for?

http://www.ebay.com/itm/Chrome-Palm...263087?hash=item4b018864af:g:pbsAAOSwNyFWb01g

 

[catalytic]

Seems lowest he would go for quantity of 1 was 9 dollars, and for qty of 2 is 8 dollars per unit.

He accepted $14 for 2 (my original post)...maybe since all the interest from GJ the prices went up? Or it was because I was nearby in socal so lower shipping?

 

[Spn1025]

He went $6.75 for 5 sets.

on another note can anyone well me what this is for?

http://www.ebay.com/itm/Chrome-Palm...263087?hash=item4b018864af:g:pbsAAOSwNyFWb01g

i was looking at that earlier.. it looks like a custom-made thing. that wrench is definetely cut.

 

[Buckgnarly]

He went $6.75 for 5 sets.

on another note can anyone well me what this is for?

http://www.ebay.com/itm/Chrome-Palm...263087?hash=item4b018864af:g:pbsAAOSwNyFWb01g

Shake and break..... you use the wrench to turn while hitting the socket with an air hammer.

https://www.amazon.com/dp/B008M23A5U/?tag=atomicindus08-20

 

[Wrenches of Death]

Shake and break..... you use the wrench to turn while hitting the socket with an air hammer.

That's the first one I've ever seen that was 3/8" drive...

I've seen them in 1/2" drive, and I've seen the ones that accept 5/16 hex bodied screwdriver bits. With a big Pozidriv bit, that used to be the ticket for GM door hinges. Worked like a champ!

WoD

 

[jshillin]

Picked up one for $8.50

 

[bfm336]

Pickwik bits from the guy:
http://www.ebay.com/itm/Lot-4x-New-...778430?hash=item4af79c09fe:g:-zIAAOSwCypWnqfH

 

[southalabama]

Got two bit sets $8

For four screwdriver sets for $7.50

 

[Avplayer]

i was looking at that earlier.. it looks like a custom-made thing. that wrench is definetely cut.

We use that at work to get slightly stripped screws out. We call em "nut busters"

 

[pauls_workshop]

Question for you guys familiar with these: How about 1/4" impact driver use? Would they hold up or not for any light impact use? - Paul

Bump, anyone know if these can be used in an impact? Will they hold up? - Paul