Notice anything different . . .

[Butters]

Between these two products:

and

Cause I don't. But one costs $39.99 at Sears (actually from a 3rd Party vendor through the Sears site) and one costs $7.99 at HF.

This came up while searching for a magnetic screwdriver holder to attach to my toolbox. Anybody know where I can find one?

 

[Super Sport]

Anybody know where I can find one?

Ummm...


...Sears.com and HF?

 

[mrpizza]

I just searched hf website, they don't have the one with the can holes, but they do have one with a tray in it.

 

[jasonreck71]

I am sure you can find it on the HF website. Shoot I was there last week and saw it...I got the glove holder

 

[KX250Fmotoracer]

They have them at my HF store? I was going to buy one a few weeks ago.

 

[mrpizza]

It said in store only, so I guess it depends on your store. I don't even have a rolling box yet and I want one.

 

[ishiboo]

Between these two products:

and

Cause I don't. But one costs $39.99 at Sears (actually from a 3rd Party vendor through the Sears site) and one costs $7.99 at HF.

This came up while searching for a magnetic screwdriver holder to attach to my toolbox. Anybody know where I can find one?

So? Same product, different prices? Happens all the time.

It could be that both HF and the seller buy it from the same manufacturer, or even have them made and they're the same... such is the world of China manufacturing.

Or, the third party seller is buying them right at HF and marking them up sky high Based on the picture being stolen from HF, I'm guessing it's the latter.

 

[1982fxr]

just a lil' mark-up there...lol

 

[synergy321]

http://www.harborfreight.com/hand-t...y-can-and-screwdriver-holder-2-can-67056.html

If you can't find it online, how did you find those pictures?

 

[plung]

I've been also looking for these wall mountable tool holders.

http://www.amazon.com/dp/B00002N7NI/?tag=atomicindus08-20

Cut it in half, screw it to a piece of wood, put magnets on back of wood. Fry's also sells this if you have on near.

http://www.frys.com/product/166675?site=sr:SEARCH:MAIN_RSLT_PG

This one cost $50 though
http://www.amazon.com/dp/B001737P9S/?tag=atomicindus08-20

Home Depot has one you can also cut up.

http://www.homedepot.com/h_d1/N-5yc...P_PARENT_ID&storeId=10051&Ntpr=1&ddkey=Search

 

[Danglerb]

I have the Sunex holder for pry bars etc, bought from www.tooltopia.com about $30, but has a locking lid yada yada and holds I think 30 items. Does what it says, but I am looking at both making a big one, and/or using the plastic Akro peg board thing too.

 

[Smallblock]

That can holder is on eBay too. http://bit.ly/wWMyCw
Still marked way up.

 

[G_P]

Between these two products:

and

The picture on top is much darker than the one on the bottom

 

[Butters]

I found this last night on Amazon:

I think it will work.

Here's the link to the Spray can holder: http://www.harborfreight.com/hand-tools/tool-box-accessories/magnetic-spray-can-and-screwdriver-holder-2-can-67056.html

The only way I found it is by looking at the Toolbox Accessories. Searching "Magnetic Spray Can", "Magnetic Holder", or "Magnetic Screwdriver Holder" doesn't bring up the "Magnetic Spray Can and Screwdriver Holder." Go figure.

 

[NUTTSGT]

Somebody taking a cheap one and marking it up.

 

[Dubbydoo]

I found this last night on Amazon:

I think it will work.

Here's the link to the Spray can holder: http://www.harborfreight.com/hand-tools/tool-box-accessories/magnetic-spray-can-and-screwdriver-holder-2-can-67056.html

The only way I found it is by looking at the Toolbox Accessories. Searching "Magnetic Spray Can", "Magnetic Holder", or "Magnetic Screwdriver Holder" doesn't bring up the "Magnetic Spray Can and Screwdriver Holder." Go figure.

I have this one and like it I also have a VIM one that hooks on the lip on the box but its to small so it wont stay it just falls off

 

[regguy1]

39.99 is pretty high for that item

 

[Dz_speed]

I have the Sunex holder for pry bars etc, bought from www.tooltopia.com about $30, but has a locking lid yada yada and holds I think 30 items. Does what it says, but I am looking at both making a big one, and/or using the plastic Akro peg board thing too.

Just ordered one. Been meaning to look for a similar unit. Thanks for the source/link!