Numbered Drill Bits

[car99r]

Looking to purchase a good set of numbered micro drill bits.

Looking for sizes ranging from #40-#76 (2.50mm-0.50mm). Woul dlike to a buy a set and of course realize that may not get all or extras but looking for as complete as set as possible with case.

Any recommendations out there?

 

[Merkava_4]

I ran a search and can only find sets in #61-#80.

 

[Atlascycle]

Where are you planning on using these small Drills? you have to have a very rigid set up to drill with a #76 Drill bit......

 

[Kevin54]

Like Merk stated, you'll find #61-80 in a set unless you buy individual pieces. Number sets go from #1-60 and #61-80. McMaster-Carr, Grainger, MSC, J&L Industrial, Enco, Travers should all have what you are looking for.

 

[car99r]

Where are you planning on using these small Drills? you have to have a very rigid set up to drill with a #76 Drill bit......

I use them for drilling out carburetor jets on metric bikes. Easier for tuning than buying **** loads of extra jets for many different carbs.

 

[car99r]

Sorry guys, Should have made myself more clear.

Anyone recommend a certain USA brand they use and prefer?

 

[Merkava_4]

Anyone recommend a certain USA brand they use and prefer?

These people have the #61-#80

http://www.gyrostools.com/index.html

For the larger sizes:

http://www1.mscdirect.com/cgi/nnsrhm

 

[Toolhorder]

My set from a tap and die set has smaller bits. It's a Hansen master set or whatever.