To avoid these ads, REGISTER NOW!

Old Classic Flat Bottom Wheelbarrow?

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
Trying to hunt down an old fashioned flat bottom wheelbarrow.
They were generally all steel, low capacity, maybe 4 cu. ft. and were not bathtub shaped like all the current ones.
Any ideas where to look?

1712284087286.png
 
Last edited:
To avoid these ads, REGISTER NOW!

bonneyman

Well-known member
Joined
Apr 22, 2010
Messages
8,804
Location
Desert SW
Watching this thread with interest! I've got a wheel barrel from my FIL's estate, but it's old old old and needs to be replaced. I've repaired some cracks in the tub, straightened and repainted, but I need a new one. Hopefully there's a USA-made one that won't crash my credit score. :rolleyes:
 

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,262
Location
The UP, God's country
The picture looks like my wife’s wheelbarrow. I think her dad bought it from the local hardware store in about 1970, give or take.

Had to replace the inner tube a couple of years ago. If I knew it was a classic, I wouldn’t let her leave it propped up against the shed year round.
 

danielbuck

Well-known member
Joined
Apr 15, 2014
Messages
922
hah, I have one in my yard that looks like it's 75 years old. I put a new tire on it, and some steel bracing on the bottom, and it's still working great! It doesn't hold water due to some rusted out spots, but it holds alot of weight!
 

RTM

Well-known member
Joined
May 13, 2019
Messages
13,188
Location
SF Bay Area
I see wheelbarrows at GS where people have a little property, 1/4 acre, not enough for a tractor, but too far to drag a bag of topsoil.

No decent ones on our local CL
 

sz0k30

Well-known member
Joined
Feb 12, 2014
Messages
884
Location
SE Michigan
Trying to hunt down an old fashioned flat bottom wheelbarrow.
They were generally all steel, low capacity, maybe 4 cu. ft. and were not bathtub shaped like all the current ones.
Any ideas where to look?

1712284087286.png
How did you get a picture of my wheelbarrow?
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
Maybe an alternative is going to be a 4 wheeled Gorilla cart.
The objective really is the flat bottom.
 

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
28,953
Location
Tacoma, Washington
The wheelbarrow in the OP's photo is the same wheelbarrow I own right now. Bought it at ACE Hardware about 6 or 8 years ago for $44 out the door on sale.
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
How did you get a picture of my wheelbarrow?
Caught ya not lookin
The wheelbarrow in the OP's photo is the same wheelbarrow I own right now. Bought it at ACE Hardware about 6 or 8 years ago for $44 out the door on sale.
I looked at theirs a few days ago and the metal pan is very thin and flexes to thumb pressure. It's not so much the load that concerns but weathering.
 

cgrutt

Well-known member
Joined
Mar 4, 2016
Messages
8,286
Probably confused but does standard Jackson steel wheelbarrow work for you? I have three of them and they're pretty good as far as wheelbarrows go. They seem to be available at all the big box and Ace hardware stores in my neck of the woods.

Screenshot_20240405_101134_Chrome.jpg
 

77thor

Well-known member
Joined
Mar 2, 2013
Messages
1,312
Location
Milwaukee, WI USA
I've got an old one like that with steel handles & frame rather than wood as in that pic.....
I'd sell it to you if you were close.
 
To avoid these ads, REGISTER NOW!

whateg01

Well-known member
Joined
Mar 13, 2006
Messages
11,355
Location
doo dah, kansas, usa
I'm trying to figure out what OP means by bathtub shaped. Don't most wheelbarrows look like that? Ace? Lowe's? Everywhere I see wheelbarrows, they look like that. Or they look like that but with two weels.

1712348408109.png
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
I've got an old one like that with steel handles & frame rather than wood as in that pic.....
I'd sell it to you if you were close.
Thanks, but not close. Shipping a wheelbarrow is a killer on the wallet.
If the weather would ever agree that it's Spring here maybe the tag sales would get going but so far nothing is stirring.
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
I'm trying to figure out what OP means by bathtub shaped. Don't most wheelbarrows look like that? Ace? Lowe's? Everywhere I see wheelbarrows, they look like that. Or they look like that but with two weels.
Exactly right. The new ones could be used as a wash tub because of the shape now which is lots of sloping surfaces and very deep.
I am guessing that the same injection molding plant might be making all the tubs.
I see that the "Ames" seems to make Ace, True Temper and Jackson so that might be why you see them as all the same.

The cheaper inexpensive vintage ones had a significant flat area in the pan and were not deep (maybe 8 to 10").
They often had wedges under the pan to level the flat area when they were sitting on the ground.
They look more like a mortar pan than a modern wheelbarrow tub.

My Brentwood wheelbarrow is somewhere between the vintage and the current shapes which serves well for some things but we need a bigger flat area for certain garden and yard jobs. Unfortunately the current Brentwoods appear updated now too.
 
Last edited:

whateg01

Well-known member
Joined
Mar 13, 2006
Messages
11,355
Location
doo dah, kansas, usa
So you want a shallow wheelbarrow? That's makes a lot more sense.




And the smallest, shallowest one that popped up.

 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
So you want a shallow wheelbarrow? That's makes a lot more sense.




And the smallest, shallowest one that popped up.

I've seen all of those, except the last kiddy one that is useless, and the pans are thin when new so they won't hold up to the weather.
Thanks for the hunt but that's why I mentioned the interest in a vintage one.
 
Last edited:

RTM

Well-known member
Joined
May 13, 2019
Messages
13,188
Location
SF Bay Area
The cheaper inexpensive vintage ones had a significant flat area in the pan and were not deep (maybe 8 to 10").
They often had wedges under the pan to level the flat area when they were sitting on the ground.
They look more
I understand completely. These were great for moving flats of plants around the yard, moving pavers, etc, which don't fit well on the bottom of the deep ones. I now use a four wheel garden wagon for those tasks, and keep the wheelbarrows for bulk stuff like mulch.



Plus the shallow ones are great for giving two kids a ride around the yard
 

GJUser

Member
Joined
Dec 27, 2019
Messages
11
Location
MD
A.M. Leonard has steel tub versions that might fit the bill. Not cheap, but very well built and parts are available. They run decent sales and free shipping deals pretty regularly.

 

Shiftless

Well-known member
Joined
Mar 9, 2014
Messages
14,551
Location
East Bay SFO
I see them around here all rusted out with rotted and missing handles, filled with dirt and flowering plants. Yard art.
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
I understand completely. These were great for moving flats of plants around the yard, moving pavers, etc, which don't fit well on the bottom of the deep ones. I now use a four wheel garden wagon for those tasks, and keep the wheelbarrows for bulk stuff like mulch.



Plus the shallow ones are great for giving two kids a ride around the yard
That's the reason for a flat bottom.
If the vintage hunt doesn't work out I think a four wheeled cart, but with solid deck and shallow sides will be a choice.
 

mv213

Well-known member
Joined
Sep 29, 2014
Messages
660
Location
Dallas, OR (the OTHER "Big D")
That's the reason for a flat bottom.
If the vintage hunt doesn't work out I think a four wheeled cart, but with solid deck and shallow sides will be a choice.
I hate wheelbarrows. I switched to a Radio Flyer 2-wheel garden cart in the ‘80s and never looked back. When it finally rusted out a couple of years ago, I got a 7 cubic foot 2-wheel Gorilla Cart. So much more stable and easier to handle than a wheelbarrow.
 

Attachments

  • IMG_0496.jpeg
    IMG_0496.jpeg
    37.7 KB · Views: 17
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
I hate wheelbarrows. I switched to a Radio Flyer 2-wheel garden cart in the ‘80s and never looked back. When it finally rusted out a couple of years ago, I got a 7 cubic foot 2-wheel Gorilla Cart. So much more stable and easier to handle than a wheelbarrow.
Two wheels for beginners.
Just kidding.
I thing a Gorilla cart (4 wheeled for flat tray) might end up being a solution.
 

mrvm

Well-known member
Joined
Feb 12, 2014
Messages
3,840
Location
PA
Regardless of what you find whether flat bottomed or vintage or 4 wheeled cart the pneumatic tires will have a better ride when new but too often the old/aged tires are found flat or dry rotted. Switched all mine to flat-free tires and now they’re always ready to work.
 
OP
B

Beemer

Well-known member
Joined
Jun 21, 2020
Messages
1,410
Location
Northeast
I hate wheelbarrows. I switched to a Radio Flyer 2-wheel garden cart in the ‘80s and never looked back. When it finally rusted out a couple of years ago, I got a 7 cubic foot 2-wheel Gorilla Cart. So much more stable and easier to handle than a wheelbarrow.
Do you like that hand grip shape?
I noticed that they make open grips too.

It does seem than having the wheels under the load would be of advantage.
 

bonneyman

Well-known member
Joined
Apr 22, 2010
Messages
8,804
Location
Desert SW
How did you get a picture of my wheelbarrow?
The zoom features on modern cell phones are amazing! :LOL:

I'll have to try to find those to look at but the new hardware store ones (Ace/True Temper) have very thing tubs and plastic wedges; not like the old ones so I am skeptical about new ones.
Don't buy an Ace one. While working there I assembled many of those (assembly was free so alot of customers had us do it) and can tell you they look nice but are China and cheap.

tractor supply
Good idea! I've got one of their stores being built fairly close to me, and needed an excuse to check them out when they open.
 

mv213

Well-known member
Joined
Sep 29, 2014
Messages
660
Location
Dallas, OR (the OTHER "Big D")
Do you like that hand grip shape?
I noticed that they make open grips too.

It does seem than having the wheels under the load would be of advantage.
I wasn’t sure I would like it, but after using it I actually do. The make open grips and I think the even make a crossbar grip. I’ll just stick with the loops.
 
To avoid these ads, REGISTER NOW!
Top Bottom