To avoid these ads, REGISTER NOW!

Old new Dewalt batteries - keep or return?

RobinMayaHawke

New member
Joined
Jul 21, 2019
Messages
3
Location
saturn
Just received two new 3Ah "20V Max" batteries to supplement my original 1.3Ah batteries for a DCD711 drill/driver (all rec'd in 2021). (I also bought a second DCD711 b/c that model has worked so well for me.)

Mfg date on these new ones is 2023 28 !!!!! I was hoping/expecting late 2025. Part of the reason to buy this new pair was to be set up with new equipment, as battery form factors can go out of production before the tools die. These were purchased from an extremely large online vendor with two-day shipping (wink).

Am I right to be dismayed? Or is the wisdom of the masses that I'm likely to get newer ones if I return these and order again? (There's also the whole cost to the world of shipping batteries to and fro.)

A very first world problem,
Thanks!
 
To avoid these ads, REGISTER NOW!

dnschmidt

Well-known member
Joined
Oct 3, 2014
Messages
7,271
Location
Phoenix, AZ
They are very likely fine. I bought some 4.0 Makita 18V batteries from Acme tool a legit dealer and they were dated 2021. They work fine but I will admit to being shocked at how old they were. I've had 12 year old Makita and Milwaukee 5.0 batteries that still work fine. The old school NiCd batteries would die in unopened containers. LiOin seem a lot less concerned with manufacturing date.
 

david3921

Well-known member
Joined
Apr 22, 2014
Messages
434
Location
Wyoming, Michigan
I would expect that lower amp batteries to be slow movers. Users tend to want the higher amp batteries for the more demanding tools like circular and reciprocating saws. That being said, for what it's worth, I wouldn't have an issue with a new battery being that old. It's never been used and many here have batteries that are many years old and going strong. I know I do. I would assume that the batteries have a warranty from date of purchase rather than manufacturing if you have an issue.
 

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,227
Location
The UP, God's country
They’ll work, but it makes me question the validity of a company that has such poor inventory turnover (or control) that it lets product sit around that long.

Turns per year is an inventory metric term that comes to mind.
 

mikedodge

Well-known member
Joined
Jun 27, 2017
Messages
2,777
If you paid a lot for them id expect newer. If you hunted around for a great deal you get what you pay for.

In reality they should be OK. They don't seem to be affected by age as much as older battery types, more use like cellphone batteries.
 

PCustoms

Well-known member
Joined
Jul 23, 2011
Messages
22,627
Location
VT
They’ll work, but it makes me question the validity of a company that has such poor inventory turnover (or control) that it lets product sit around that long.

Turns per year is an inventory metric term that comes to mind.

3 levels deep into retail distribution on batteries that are 2.5yrs old. LOL

Maybe we should go even deeper and figure out when the raw cells were made?

This place is ridiculous sometimes.
 

dscheidt

Well-known member
Joined
Apr 26, 2017
Messages
2,888
3 levels deep into retail distribution on batteries that are 2.5yrs old. LOL

Maybe we should go even deeper and figure out when the raw cells were made?

This place is ridiculous sometimes.

it's not at all ridiculous. dewalt is going to base the warranty term on the date of manufacture, plus a reasonable supply chain dwell time.[1] So he's giving up a substantial fraction of the warranty period. If he paid retail for them, he's not getting what he paid for. If they were discounted to allow for the age, that's different.

[1] yes, it's supposed to be date of purchase, but good luck getting them to believe you bought a 2.5 year old battery at retail, versus trying to slip an older battery past them...
 
To avoid these ads, REGISTER NOW!

dnschmidt

Well-known member
Joined
Oct 3, 2014
Messages
7,271
Location
Phoenix, AZ
it's not at all ridiculous. dewalt is going to base the warranty term on the date of manufacture, plus a reasonable supply chain dwell time.[1] So he's giving up a substantial fraction of the warranty period. If he paid retail for them, he's not getting what he paid for. If they were discounted to allow for the age, that's different.

[1] yes, it's supposed to be date of purchase, but good luck getting them to believe you bought a 2.5 year old battery at retail, versus trying to slip an older battery past them...
Not if they are like Milwaukee. If you have the dated sales receipt, which Amazon stores automatically for DeWalt as does Home Depot for Milwaukee, the battery guarantee starts from date of purchase. On all battery purchases ALWAYS keep or store on your computer the sales receipt. This situation is extremely common and this is your best protection from being rejected for warrantee.
 

Steve_P

Well-known member
Joined
Sep 15, 2010
Messages
5,182
I personally wouldn't worry about it and just use them; you probably got a good deal for this reason- so that they could move them from stock. One of the Ego batteries I purchased was well over a year old, but again it was on sale for probably the same reason- move stock.

As said, the new battery chemistry seems to be holding up very well over time. There are Teslas that are 5+ years old, 100K+ miles, and still have >90% of the battery performance (mile range) as they did when new; they've obviously been charged a lot. I've not noticed any degradation in performance in my DeWalt or Ego batteries, which mostly sit unused, and many are 5 years old now.
 

rust in the eye

Well-known member
Joined
Oct 2, 2017
Messages
2,762
Location
Chicagoland
As batteries are a perishable item I'd be disappointed if paying typical retail.
If these were a screaming deal I think you've found why.
DeWalt is a good product, I expect they'll probably be fine regardless.
 

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,227
Location
The UP, God's country
3 levels deep into retail distribution on batteries that are 2.5yrs old. LOL

Maybe we should go even deeper and figure out when the raw cells were made?

This place is ridiculous sometimes.
Typically my car batteries have a label dated within a few weeks of purchase.

That’s not the manufacture date of course., but it is a representation of “freshness”.

It took three weeks after manufacture date for my car to get from Mexico to Michigan.

Tires are dated, and typically sold well within a year.

My milk from the local grocery store was bottled pretty close to the expiration date, too, and even the bananas don’t hang around..

No reason for a power tool battery to hang around for more than a year.
 

dnschmidt

Well-known member
Joined
Oct 3, 2014
Messages
7,271
Location
Phoenix, AZ
Typically my car batteries have a label dated within a few weeks of purchase.

That’s not the manufacture date of course., but it is a representation of “freshness”.

It took three weeks after manufacture date for my car to get from Mexico to Michigan.

Tires are dated, and typically sold well within a year.

My milk from the local grocery store was bottled pretty close to the expiration date, too, and even the bananas don’t hang around..

No reason for a power tool battery to hang around for more than a year.
Your milk doesn't come from China nor does it go through customs.
 

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,227
Location
The UP, God's country
Your milk doesn't come from China nor does it go through customs.
That would add a day or two.

My car batteries ( at least the last two) came from China, and the last two batches of tires came from Korea and China.

My milk comes from Wisconsin. Isn’t that almost as far?
 

Tractorsellr

Well-known member
Joined
Oct 25, 2016
Messages
207
Location
Tx
I ordered batteries from Grainger last yr and got batteries with a 2023 manufacturer date.
Just received two new 3Ah "20V Max" batteries to supplement my original 1.3Ah batteries for a DCD711 drill/driver (all rec'd in 2021). (I also bought a second DCD711 b/c that model has worked so well for me.)

Mfg date on these new ones is 2023 28 !!!!! I was hoping/expecting late 2025. Part of the reason to buy this new pair was to be set up with new equipment, as battery form factors can go out of production before the tools die. These were purchased from an extremely large online vendor with two-day shipping (wink).

Am I right to be dismayed? Or is the wisdom of the masses that I'm likely to get newer ones if I return these and order again? (There's also the whole cost to the world of shipping batteries to and fro.)

A very first world problem,
Thanks!
I bought 4 batteries from Grainger last year 10/25. Didnt pay any attention to the date till I got home and looked. I took those 2 packs back and asked for my money back or newer batteries. Amazing how they came out with 2 packs made in 6/25. With a 3 yr warranty on dewalt batteries, I dang sure not going to pay for batteries that are almost out of warranty.
 

82355

Well-known member
Joined
Jul 13, 2013
Messages
688
Location
Bradish Nebraska
I have Dewalt batteries from 2017 that still work fine. New batteries from a couple years ago will be fine.

Martin
 
To avoid these ads, REGISTER NOW!
Top Bottom