Old otc chain leveler

[zkdiesel]

This 2k rated chain leveler has been awesome for me. Old, built tough, setup like a manual chain hoist for how it works. Works great for on the go adjustments. Use it installing skidloader engines all the time. With overhead cranes I have the hook height required

 

[ChevyEFI]

Trolley mount? Nice.

 

[zkdiesel]

Trolley mount? Nice.

On what? There’s a lot of garbage in the truck bed picture

 

[Firebrick43]

Interesting. I have never seen that style of leveler, even in the industrial factories that cost wouldn't be as much of a consideration. Is any levelers made of similar style nowadays?

We always used a ratcheting chain comealong on one leg when setting large pumps or motors when there were obstacles to get around when pulling or setting in place.

 

[Renegade1LI]

The company that does rigging for us has a few, still available new. Looks like you can get 2000lb or 3900lb.

OTC 1805 Floor Crane Sling | Mile-X Equipment

The OTC 1805 Load-Rotor Sling has a 56 1/2" Long Chain (1/4") and hook assembly with forged swiveling hook on each end.

www.mile-x.com

 

[JuncleJohn]

Nice new excavator coupler in the truck. We just built a new one for a JD and starting to build another for a Komatsu.

John

 

[j3rf]

Use the same one at my Subaru dealer on our engine hoist for pulling engines.

The company that does rigging for us has a few, still available new. Looks like you can get 2000lb or 3900lb.

OTC 1805 Floor Crane Sling | Mile-X Equipment

The OTC 1805 Load-Rotor Sling has a 56 1/2" Long Chain (1/4") and hook assembly with forged swiveling hook on each end.

www.mile-x.com

 

[zkdiesel]

Nice new excavator coupler in the truck. We just built a new one for a JD and starting to build another for a Komatsu.

John

Bad things happened today

 

[ChevyEFI]

On what? There’s a lot of garbage in the truck bed picture

Hell if I know. You can tell us what the CM1 is if you want.

 

[LXCam]

Bad things happened today

Is that you’re official fork off tool?

Or the I’m forking done with this ****..

Or maybe the “get the fork outta my way”!

 

[zkdiesel]

Hell if I know. You can tell us what the CM1 is if you want.

That’s a 1 ton 3 phase chain hoist that’s low clearance bought for Pennies on the dollar cause it’s 3 phase 480 power

 

[JuncleJohn]

Yeah, I don’t see how that’s gonna work.

John

 

[zkdiesel]

Yeah, I don’t see how that’s gonna work.

John

What’s the question??? It went out today and was workijr

 

[JuncleJohn]

Was thinking the forks are on the wrong side. I‘m not a heavy equipment operator. Not a clue on how that would be used.

John

 

[sk farmer]

i am going to venture a guess.

cleaning debris out of ditches and plugged culverts?

 

[zkdiesel]

i am going to venture a guess.

cleaning debris out of ditches and plugged culverts?

******* beavers

 

[Firebrick43]

******* beavers

 

[sk farmer]

******* beavers

do i get credit for being close.

i was pretty sure of the purpose, i just missed the cause. my creek doesn't flow enough to support them even though they get up here on occasion. i do have issues with corn stalks and soybean straw plugging culverts and it would work for that as well.