If you see some you like let me know for better pics, open to offers, don't be shy
Now I am in need of the following
Well I finally got around to setting up my Hansen tray’s, time to fill in some holes and upgrade some foreign sockets
Craftsman sockets wanted very good to new prefer older V thru GI series, non-laser etched all 6 point unless noted. I don’t think some of these sizes were carried by craftsman will consider other US made brands
¼” drive standard 1/8”, 5/8”, 4.5mm, 15mm
¼” drive DEEP 1/8”, 5/32”,1/2, 9/16”, 5/8”, 4.5mm, 5.5mm, 15mm,
3/8” drive standard, 15/16”, 1”, (8mm, 20mm--12pt)
3/8” drive DEEP 15/16”, 1”, 6mm, 7mm, 8mm, 20mm 21mm
½” drive standard, 12mm, 21mm
½” drive DEEP, 1 1/8”, 1 ¼”, 10mm, 11mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 24mm, 25mm,
Proto Professional 3/8” drive
Standard ½” (5216) 12pt., 15/16” (5230) 12pt., 1” (5232 ) 12pt.,
½” drive
Deep 1 1/8“ (5336) 12pt., 1 ¼” (5340) 12pt.
MAC 3/8” drive these model #’s preferred but all considered
¼” Standard # X86
5/16” Standard # X106
7/8” Standard # X286
1” Standard # X326
¼ “Deep--#XD086
15/16” Deep--#XD306 or 302
1” Deep--#XD326 or 322
Snap on 3/8” drive
15/16” Deep--#SFS 301
1” Deep--#SFS321
Vlchek Openends
Vlchek Box ends
Large sizes, under the doller bill is Plomb, the silver "S" is marked AT&S
Barcalo's
Armstrong's
More Barcalo's
Early Plomb
More early Plomb
Plomb's
Now I am in need of the following
Well I finally got around to setting up my Hansen tray’s, time to fill in some holes and upgrade some foreign sockets
Craftsman sockets wanted very good to new prefer older V thru GI series, non-laser etched all 6 point unless noted. I don’t think some of these sizes were carried by craftsman will consider other US made brands
¼” drive standard 1/8”, 5/8”, 4.5mm, 15mm
¼” drive DEEP 1/8”, 5/32”,1/2, 9/16”, 5/8”, 4.5mm, 5.5mm, 15mm,
3/8” drive standard, 15/16”, 1”, (8mm, 20mm--12pt)
3/8” drive DEEP 15/16”, 1”, 6mm, 7mm, 8mm, 20mm 21mm
½” drive standard, 12mm, 21mm
½” drive DEEP, 1 1/8”, 1 ¼”, 10mm, 11mm, 12mm, 13mm, 15mm, 16mm, 18mm, 20mm, 23mm, 24mm, 25mm,
Proto Professional 3/8” drive
Standard ½” (5216) 12pt., 15/16” (5230) 12pt., 1” (5232 ) 12pt.,
½” drive
Deep 1 1/8“ (5336) 12pt., 1 ¼” (5340) 12pt.
MAC 3/8” drive these model #’s preferred but all considered
¼” Standard # X86
5/16” Standard # X106
7/8” Standard # X286
1” Standard # X326
¼ “Deep--#XD086
15/16” Deep--#XD306 or 302
1” Deep--#XD326 or 322
Snap on 3/8” drive
15/16” Deep--#SFS 301
1” Deep--#SFS321
Vlchek Openends
Vlchek Box ends
Large sizes, under the doller bill is Plomb, the silver "S" is marked AT&S
Barcalo's
Armstrong's
More Barcalo's
Early Plomb
More early Plomb
Plomb's
Last edited: