One coat or two for top coat?

[rblahetka]

Hi. I just finished laying down the Armorclad epoxy and chips, and will be doing the military grade top coat this evening. My garage is 430 sq feet. I seemed to have read most people who have done the top coat only go through half of what they are given. So, my question is, if I have enough, should I just stick with one coat, or do two? Will a second coat make it more durable, or am I just wasting time and possibly risking an issue down the road?

 

[texas123]

I had to get extra topcoat, probably due to the extra flake though. It did look blotchy with only one coat, second coat made it look better. (I used the regular topcoat).

 

[bigjon]

If you have sufficient product go with 2 coats.

I found 1 coat wasn't satisfactory for me.

 

[rblahetka]

Thanks. I did a second coat this morning. I found the anti slip to be very rough and too fine. I went over it again with no anti slip to hopefully knock it down a bit. Can't wait for the smell to be gone.

 

[Armorpoxy]

95% of our customers do a single coat, but an additional coat never hurts!