P&C Stuff

[Oldtuleguy]

I wonder if the straight ones are not finished. Maybe did not get to the bending station!

 

[Private Lugnutz]

Next are what looks like 3 socket wrenches that never received their bend.

I'd have to agree with you there. There are antique straight socket wrenches. I have some. But they typically have a socket on each end, and either a square shank for turning with a wrench, or a cross-drilled hole for turning with a crossbar.

Does anyone have pictures of the chronological forging process of a socket wrench like this being made?

The process for making the Gruber offsets I have is described in post #8 of the Gruber thread, X, and the bend came last. But those were hand forged from octagonal bar stock, upsetting the end twice, first to form the socket, and again to mill it. Then they bent the shank. Seems likely/logically the same for machine forged, to get to the state of yours, then bend last.

 

[Provincial]

I picked up two P&C pieces at the local flea market Sunday. A N87 DBE and an open-end structural wrench. The structural wrench is marked with a P&C logo that ran off the edge, and 5/8, which is the USS size for the 1-1/16 opening.

I'm pretty sure that the structural wrench is a 907-S, which is the part number shown in the 1939 catalog. In the 1949 catalog, the number changed to a plain 934, and the bolt size was listed as 9/16" for some reason. I believe it is early because it does not have the pronounced flats at the bend that show up on the later version.

 

[Smokeshow69]

I’m liquidating my collection. I need to eliminate some rabbit holes so I can focus . If you are looking for something specific or want better pictures, let me know! Pm me with requests please so we don’t clutter the thread!

 

[Smokeshow69]

More. I am willing to sell one or sell it all. Located south of Portland Oregon. I would be willing to ship in flat rate boxes

 

[bmwrd0]

Smoke, do you have 15/16" combo in there? I need one to complete a tool board I have.

 

[Mintgrun]

I picked up an old screwdriver that might be an early P&C example. The number 654 is legible, but I'm not sure about the P&C mark. It looks like their stretched hexagon logo shape in front of the number. Has anyone seen/found a clearly marked P&C screwdriver with this style handle? The one on top is the one in question. The one below it has a faint, but clear logo.

 

[stormking]

Mintgrun, I'll look at my wood handle drivers when I get home, I believe I have one like that. (look at the 40P catalog pg 30)

 

[Smokeshow69]

Smoke, do you have 15/16" combo in there? I need one to complete a tool board I have.

You know I do and it is yours!

 

[mritchie77]

I’m liquidating my collection. I need to eliminate some rabbit holes so I can focus . If you are looking for something specific or want better pictures, let me know! Pm me with requests please so we don’t clutter the thread!

Dang, too bad none of those plastic handle screwdrivers are Plomb. Having a hard time finding any! LOL

 

[jabberwoki]

I’m liquidating my collection. I need to eliminate some rabbit holes so I can focus . If you are looking for something specific or want better pictures, let me know! Pm me with requests please so we don’t clutter the thread!

Any chance of some numbers off those screwdrivers? Also are any of the pipe wrenches the HD version?

 

[Smokeshow69]

You bet. I have gotten enough responses asking for some better photos. I will take some with tools laid out. I wasn’t trying to be a troll, just wanted to offer them to collectors on here before I have a tool sale.

 

[Oldtuleguy]

I don't think anyone here minds getting first shot at some of your stuff smoke!

 

[Smokeshow69]

Ok, super irritated. I tried to post some individual lots in the classifieds but of course you can’t bump your post for 72 hours.

round shank dbe’s- 1” and up- I want $10 each. 1” down is $5 except for the 2 smallest ones which are $2 each

list- n90, n87, 2242, 2236, 2232, 2229( one branded and one not), 2228- one branded and one old one with no size markings) , 2222, 2216, 2214

 

[Smokeshow69]

Screwdrivers- I would like to sell these in lots of possible.

amber color-sold
404,604x2, 670,501, 609, 608

better grip/square handle- $12
609,706, 544, 604, 402x2

wood handle and offset screwdriver-$5

2 clutch drivers#483- these are super cool*** still have the factory price tags $5

 

[Smokeshow69]

I will post more sorted tools tomorrow!
Saukit is first in line for some dbe’s and a few other things. Jabberwoki has first dibs on the amber drivers if he wants them?

 

[Smokeshow69]

Combos- if you want to put together a set of wrenches, let’s talk but I am willing to sell individually to help fill holes-

1/4 and 5/16- these little dudes are $15 each. Not common to find!

3/8-15/16 are $2 each regardless of which series

1”-1-1/4- $5 each

I do have 2 100 series wrenches and 2 pretty early 3/4 wrenches

 

[Smokeshow69]

Pipe wrenches- 1806-$10, 1810-$5,1814-$5

adjustable wrenches- 1712-$10
1708-$5 each your choice

pliers-compound leverage-$10
Slip grips$5
Water pump- earlier-$10

 

[Smokeshow69]

I haven’t had time to lay everything out and get photos but will have time on Sunday so that those of you who have boxes can get them shipped to you! Even have a few boxes of things I have taken teaser shots of

 

[Smokeshow69]

Ok, I will be taking photos shortly of the last few lots and posting them here in about 1 hour so I can get everyone’s lots in the mail to them

 

[Smokeshow69]

Chisels/ punches- I would like to sell the whole lot @$20 . Total of 11 with only 1 repeat

 

[Smokeshow69]

1/2 drive tools-priced individually
Speed wrench-6215-$4
1/2 hinge handle- short-6230-$5
6211- ratchet-$4
Long hinge handle- 6238- wartime/non plated. Nice detent and not sloppy $10
Bent t handle- free if you buy other things and it fits in the package-6265
Extension-6203-$4

 

[Smokeshow69]

3/8 drive
3215 speed wrench- non plated-$5
3203-$2
Rough 3203- free with other purchases
3215-speed wrench-$5
3230- hinge handle-$4
3209-ratchet- $4

 

[Smokeshow69]

dbe’s- non offset
2536- $5
2528-$2
2522-$2
2518x2- regular and 100 series $2
2516-$2
2514-$2

 

[Smokeshow69]

Special tools-
Distributor wrench-$4
Steering wheel puller-$4
Electrical/tune up wrenches-2812A and 135-$2 each
Brake spoon$4
Extractor 9524-$2
Brake bleeding wrench-$4
Flare nut wrench- 3753-$2
Cross bar puller and mismatched feet$4

 

[Smokeshow69]

Tappet wrenches-sold

 

[Smokeshow69]

Does-$2 each… listed in order. Some early ones mid way down
2832, 2828, 2825, 2724, 2820, 2818, 2816, 2814, 2812

 

[Smokeshow69]

3/8 drive deep- a bunch of these are 100 series

 

[Smokeshow69]

3/8 drive sockets- as you can see I have a bunch of different types- plated, 100 series, non plated, 6pt, 12 pt, etc. let me know what you are looking for. Sockets are .50 each or the whole lot $10

 

[Smokeshow69]

1/2 drive-
U joints- non plated and plated-$4 each
Sockets are .50 each except the more uncommon 32nd sizes! Those are $2 each or buy this whole lot for $20! Plated and non plated sockets, 100 series, etc so let me know if you are looking for a particular socket.

This is the last posting. I still have my screwdrivers and some dbe’s and other wrenches and am open to offers!

 

[Smokeshow69]

Forgot my 3/4 sockets- All 3/4 sold
13/16-8 pt
1
1-1/8
1-7/16- been welded

 

[bmwrd0]

Smoke, PM sent about the Pullers.

 

[Username already in use]

A few P&C goodies followed me home yesterday.
The notable find is not one, but TWO of the seemingly rare 1-3/16" half inch drive sockets. Found at 2 different tables, the first one, I asked the vendor how much and he says "dunno, how bout $0.50 but I don't have change". I tried to hand him a buck and he said "just take it". WOO HOO.

 

[BlakeTheCarGuy]

I still have to get posting lol. I bought the whole socket lots from Smokeshow69 and got the brake spoon, a large wrench and extension from him as well. I give him an A+ for packing and everything else too. Haven’t had a chance to sort all of the sockets yet but I will then show more closer pictures of all of them. Before this my P&C collection was small but now it seems huge LOL. Sorry everyone I seen those sockets and I’m like yeah I need them all lol.

 

[saukit]

Here's some recently cleaned P&C stuff, I think the 6211 ratchet may be the first P&C rat I've found which is kinda weird as they're not rare. Then some little combos, 2714, 2712, and a tiny 2708.

 

[d42jeep]

Here is a rusty Phillips driver I found recently. I removed the top layer of rust but will leave the rest for the next owner.
-Don

 

[MR.X]

Mid 20's Ford Model T flywheel Cap screw tools 11/16". Notice the extension is a hex drive.

 

[MR.X]

Bob, tired of the same old Hex, started freelancing various Polygons including this Octagon.

 

[jabberwoki]

more fantasticasum from the X collection

 

[Oldtuleguy]

That is a cool logo.