pallet jack load wheels

[HoosierMark]

I have an EZ lift pallet jack. I use it to move my old snow plow around and raise and lower it to hook up to the truck. I just noticed both of the rollers on the forks have lost the 1/4 inch plastic coating around the outside of the steel roller. I am not sure what I did but they both basically disintegrated and broke off in pieces. I read on line that they are simple to replace. Are they all pretty much the same size or do I need to disassemble them and measure before I order? I tried to find replacements for EZ lift brand but could not find any information.

 

[dougw181]

You might give Generic Parts Service a call at 800-331-0839. They specialize
in pallet jack parts. I was in the forklift business for 20 years and we used to order from them quite often and always received great service.

 

[SimS]

HM;

Same thing happened to my pallet jack. Remove one of the wheels and take measurements. Go to ebay and you can get a pair for $30-$40. Also surpluscenter has them sometimes for even less. Good luck.
SimS

 

[OccupantRJ]

Urethane falls apart with age, and yes, new ones are $40 to $80 a pair. They are available in various compounds. Amazon has EZ lift wheels.

 

[Ole Slewfoot]

Grainger, Zorro and Uline all have options. steel wheels are a little louder, but that doesn't always mater.

 

[OccupantRJ]

The urethane is gone off of both of my steer wheels. It makes more noise moving around, but it only goes about 20 feet during a usage to move a machine in my shop. I have to decide if it is worth it to spend money for that. It does tilt the lift backwards a small amount, 1/4” in 4 feet.