To avoid these ads, REGISTER NOW!

paver sealer

gregs

Well-known member
Joined
Mar 16, 2007
Messages
1,646
Hi All, Looking for recommendations for paver sealer. I figured its a kind of floor so it should be ok in this forum. I have a pool deck I built about 5+ years ago that I never sealed. Its looking faded and harder to keep clean. I am looking for something with the "wet" look as that is supposed to help restore the color. Conflicting views on solvent based vs water based materials. Was also wondering if any of the clear top coat materials for shop floors would work on a paver patio. BTW they are concrete paver blocks. Thanks for any help.
 
To avoid these ads, REGISTER NOW!

LegacyIndustrial

ALLIANCE MEMBER
Joined
Jun 7, 2010
Messages
7,995
Location
deerfield, IL
Gregs:
Our HD6525MMA is commonly used on pavers.
It is solvent based.
(1) coat using a roller is normally all that is needed.

Do not seal these with anything designed for inside. It will ghost and look terrible.

Good luck.
 
To avoid these ads, REGISTER NOW!
OP
G

gregs

Well-known member
Joined
Mar 16, 2007
Messages
1,646
Is there a way to add a slight tint to the sealer that would darken the pavers slightly? Some where I ran across a sealer that had a brown tint component to it. I wouldnt want it very heavy as the pavers are the typical mixture of colors and tones.
 
To avoid these ads, REGISTER NOW!
Top Bottom