I went to the local pawnshop and spent an hour digging through their sockets and wrenches for the name brand quality tools and I got lucky. Didn't find any Snap on or Mac but I found alot of Craftsman made in USA and Gray Tools.
For the Gray Tools stuff:
25/32" / 3/4" offset box end wrench
13/16" combination wrench
3/4" combination wrench
11/16" combination wrench
5/8" combination wrench
17mm combination wrench
12 mm combination wrench
And a Canadian Forge marked 13/16" Combination Wrench. I don't think it's Gray Tool related but still made in Canada with a little anvil symbol with a maple leaf in it and CANADA marked on the handle.
I got two Gray sockets, a shallow 5/8 and a deep 3/4". The 5/8 is half inch drive and the 3/4" is 3/8" drive. Both 12 point sockets.
I'm Canadian so the Gray Tools being made in Canada is something I like.
For the Craftsman stuff:
1-1/16" Combination wrench
7/8" combination wrench
11/16" combination wrench
11/32" combination wrench
11/32" / 3/8" combination wrench
1", 7/8", 2x 3/4", 13/16", 2x 11/16", 2x 5/8", 3x 9/16", 1/2" and a 7/16" socket in 1/2" drive. All of them are 12 point.
I also got some 3/8" drive sockets too:
13/16" x2, 11/16" x 3, 19mm x 2, 5/8 x 2, 13mm, 7/16 x 2, 5/16 and an 11/32. All the Craftsman sockets are shallow and I got a mix of 6pt and 12 pt in the 3/8" Drive. I got all of this for 55 bucks plus a little hand tray that will most likely end up in the bottom of my toolbox for the spares.
For the Gray Tools stuff:
25/32" / 3/4" offset box end wrench
13/16" combination wrench
3/4" combination wrench
11/16" combination wrench
5/8" combination wrench
17mm combination wrench
12 mm combination wrench
And a Canadian Forge marked 13/16" Combination Wrench. I don't think it's Gray Tool related but still made in Canada with a little anvil symbol with a maple leaf in it and CANADA marked on the handle.
I got two Gray sockets, a shallow 5/8 and a deep 3/4". The 5/8 is half inch drive and the 3/4" is 3/8" drive. Both 12 point sockets.
I'm Canadian so the Gray Tools being made in Canada is something I like.
For the Craftsman stuff:
1-1/16" Combination wrench
7/8" combination wrench
11/16" combination wrench
11/32" combination wrench
11/32" / 3/8" combination wrench
1", 7/8", 2x 3/4", 13/16", 2x 11/16", 2x 5/8", 3x 9/16", 1/2" and a 7/16" socket in 1/2" drive. All of them are 12 point.
I also got some 3/8" drive sockets too:
13/16" x2, 11/16" x 3, 19mm x 2, 5/8 x 2, 13mm, 7/16 x 2, 5/16 and an 11/32. All the Craftsman sockets are shallow and I got a mix of 6pt and 12 pt in the 3/8" Drive. I got all of this for 55 bucks plus a little hand tray that will most likely end up in the bottom of my toolbox for the spares.