To avoid these ads, REGISTER NOW!

Pelican 1460 Tool Box

S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
<iframe width="560" height="315" src="http://www.youtube.com/embed/GW09NLrvAq8" frameborder="0" allowfullscreen></iframe>

There was enough interest in the Pelican 1560Tool that I put a quick show&tell preview video together.

It's due back soon from a friend that's doing 2nd opinion testing for me.

Pros:

Indestructible, or close to it
Comfortable to carry even when loaded
Flexible configuration

Cons:

A little pricey
I wish there were additional divider options, but that's because I'm finicky about organization

Overall, I think it's a VERY NICE tool box. The 2nd reviewer likes it even more than I do, and after using it for a few weeks, he's not too happy about giving it back.

It'll be back on my test bench in a few days, so if you have any questions, let me know!
 
To avoid these ads, REGISTER NOW!
N

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
51,515
Location
Northern Central Ohio
I like the pull out tray, a good design.

I see they make an EMS version, looks like it would hold up quite well as most pelican stuff does. I'd imagine they would offer addition dividers as they are a cheap piece to package and sell. I looked through all 209 available parts and there were none.
 
OP
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
NUTTSGT said:
I like the pull out tray, a good design.

I see they make an EMS version, looks like it would hold up quite well as most pelican stuff does. I'd imagine they would offer addition dividers as they are a cheap piece to package and sell. I looked through all 209 available parts and there were none.
Click to expand...
I did a very thorough search as well, and couldn't find any. I assume it's because the product is so new and is probably still making its way through distribution channels.

My biggest desire is a greater variety of sizes, not just the two that it comes with. But then again, making custom dividers out of polystyrene or ABS should be quick and easy, maybe even cheaper.
 
W

WR250F

Well-known member
Joined
Aug 28, 2011
Messages
481
Hey Stuey,

THANK YOU for the review. I've been giving serious thought to buying one of these just this week.

A few questions:

What is the inside width of the bottom ? I'm trying to see if a torque wrench will fit in there.

Regarding the trays; will they support any weight ? Weight such as an array of sockets 1/4, 3/8 and 1/2 from 5mm up to say 27mm.

The attachment of the trays to the box itself; are the metal hinges or 'arms' sturdy ? From the online pics I see I can't tell if they are cheapo stamped metal, or robust enough to hold up to the weight of a set of sockets, hex sockets, various pliers, 8mm thru 19mm wrench set, couple of hammers etc..

I think the EMT version NUTTSGT mentioned is a great idea/origin, but most of the stuff a typical EMT would put in one if these is fairly lightweight. I'm thinking the tool box version is simply a different plastic tray arrangement, without any additional reinforcing of the trays/hinges.

The trays and hinges may not need any additional reinforcing, but that's really tough to figure out from an online pic.

You know what the average trunk/truck tool box has in it, do you think it's up to the task or just a marketing thing to sell a few more boxes by moving the tray dividers around ?

I'm a big fan of Pelican boxes. I feel confident the box itself will hold up just fine. What I'm wondering about is the flimsy looking trays inside and the internal width of the thing.
 
OP
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
WR250F said:
Hey Stuey,

THANK YOU for the review. I've been giving serious thought to buying one of these just this week.

A few questions:

What is the inside width of the bottom ? I'm trying to see if a torque wrench will fit in there.

Regarding the trays; will they support any weight ? Weight such as an array of sockets 1/4, 3/8 and 1/2 from 5mm up to say 27mm.

The attachment of the trays to the box itself; are the metal hinges or 'arms' sturdy ? From the online pics I see I can't tell if they are cheapo stamped metal, or robust enough to hold up to the weight of a set of sockets, hex sockets, various pliers, 8mm thru 19mm wrench set, couple of hammers etc..

I think the EMT version NUTTSGT mentioned is a great idea/origin, but most of the stuff a typical EMT would put in one if these is fairly lightweight. I'm thinking the tool box version is simply a different plastic tray arrangement, without any additional reinforcing of the trays/hinges.

The trays and hinges may not need any additional reinforcing, but that's really tough to figure out from an online pic.

You know what the average trunk/truck tool box has in it, do you think it's up to the task or just a marketing thing to sell a few more boxes by moving the tray dividers around ?

I'm a big fan of Pelican boxes. I feel confident the box itself will hold up just fine. What I'm wondering about is the flimsy looking trays inside and the internal width of the thing.
Click to expand...

I'll check as soon as I can. For what it's worth, I though that everything felt sturdy, and the pivoting support arms certainly aren't lightweight.

1/4" 3/8" and 1/2" might be alright, but my impression is that the trays are designed for supplies, parts and a few tools, not things like sockets which can add up in weight fast.

FJ 432 said:
Thanks.

What's your opinion of the 0450? Have you ever done a review?
Click to expand...

Sorry, but I haven't checked one out in person yet. I haven't really made up my mind yet, but it's certainly a specialized product. It's the type of tool case that you either NEED or don't. I'm sure it's built to insane toughness and high quality, though, and do like how they offer quite a bit of configuration flexibility.
 
N

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
51,515
Location
Northern Central Ohio
WR250F said:
Hey Stuey,

THANK YOU for the review. I've been giving serious thought to buying one of these just this week.



I think the EMT version NUTTSGT mentioned is a great idea/origin, but most of the stuff a typical EMT would put in one if these is fairly lightweight. I'm thinking the tool box version is simply a different plastic tray arrangement, without any additional reinforcing of the trays/hinges.
Click to expand...

Hey man just in case you didn't realize it, the EMT box has three tray whereas the tool box only has two. I'm not sure if the EMT case has a sliding drawer though.

Here's a link to the specifications.

EMT
http://pelican.com/cases_detail_specs.php?Case=1460EMS

Tool box
http://pelican.com/cases_detail_specs.php?Case=1460TOOL
 
To avoid these ads, REGISTER NOW!
OP
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
The 1460EMS does have shallower trays at least they look shallower), with a closer-together divider grooves. I'm sure you can slide the trays out as well.

Visualize an EMS opening the case to apply emergency treatment on a patience. They're going to be slamming the case open and yanking the trays out to get what they need. If the toolbox is built to handle those types of needs, I'm sure it can handle anything one of us can throw at it.
 
N

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
51,515
Location
Northern Central Ohio
Stuey said:
Visualize an EMS opening the case to apply emergency treatment on a patience. They're going to be slamming the case open and yanking the trays out to get what they need. If the toolbox is built to handle those types of needs, I'm sure it can handle anything one of us can throw at it.
Click to expand...

Hey now !!:lol_hitti
 
S

Slip_Kid

Well-known member
Joined
Apr 20, 2010
Messages
615
Location
Rhode Island
Another good thing about these boxes is they have a good seal to keep the weather out, less tool rust in the truck.
 
W

WR250F

Well-known member
Joined
Aug 28, 2011
Messages
481
Slip_Kid said:
Another good thing about these boxes is they have a good seal to keep the weather out, less tool rust in the truck.
Click to expand...

My thoughts exactly ;)

Pelican makes some great boxes.

I just don't have one to put my hands on, or I'd already have one of these.

$200 isn't a huge amount, but $200 for something that won't work as I hoped is something I'd like to avoid.

That's one reason I like Stuey's tool reviews, not some marketing hype, just the facts from a 'if I owned it' perspective.
 
E

Exceller8

Well-known member
Joined
Jul 19, 2012
Messages
2,337
Location
Banning, CA
Stuey, I know this is an old thread but I wanted to see how the box was holding up for you? I'm thinking of picking up a 1460 myself. :thumbup:
 
OP
S

Stuey

Well-known member
Joined
Jan 8, 2008
Messages
11,034
Location
28m above sea level
Exceller8 said:
Stuey, I know this is an old thread but I wanted to see how the box was holding up for you? I'm thinking of picking up a 1460 myself. :thumbup:
Click to expand...
I'm still not fond of the way the trays are organized, but thus far nothing's worn down or been damaged.

I really like how it's great for quick operations. I've been using it as a project box recently, and it's nice not to have to dig through multiple tool boxes and organizers for short sessions.

Pelican was dead-on accurate in designing this for technicians.

I would recommend that you plan out how you would organize the trays. If you can envision a layout that works well for you, then go ahead and give it a try.

Amazon now carries this model, so you could always test it and then return it with little penalty if it doesn't fit your needs well.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom