To avoid these ads, REGISTER NOW!

Pioneer mini split extra line set

alex2929

Well-known member
Joined
May 31, 2015
Messages
201
What’s my best option for this extra line length? Pioneer says 10 ft is the minimum but can go as low as 5 but may have to remove some refrigerant. I am guessing if I would shorten I would need about 7ft. I have a void in the wall with wasted space directly behind the indoor unit. I could coil or do whatever with it around the outdoor unit too. Or should I shorten to what I need?
 

Attachments

  • C9B28E73-5398-421D-A7E6-AC5F2BB60664.jpeg
    C9B28E73-5398-421D-A7E6-AC5F2BB60664.jpeg
    351.5 KB · Views: 33
  • DCF83D9B-B61D-464D-81D9-83524B74F07E.jpeg
    DCF83D9B-B61D-464D-81D9-83524B74F07E.jpeg
    829.8 KB · Views: 33
To avoid these ads, REGISTER NOW!

jjrbus

Well-known member
Joined
Dec 8, 2018
Messages
619
Location
Florida
I installed the line set in a serpentine fashion behind the outdoor unit. Piece of pie!
 
To avoid these ads, REGISTER NOW!
OP
A

alex2929

Well-known member
Joined
May 31, 2015
Messages
201
Should the condenser not be outside?
It should be but it’s not. Doesn’t really work on the outside the way the building is set up. I have a 20x18 door right next to it and that part of the building is not insulted or anything.
 
To avoid these ads, REGISTER NOW!
Top Bottom