Pliers for these type of clips?

[Brettholmes89]

I've been searching for a set of pliers to easily remove and installed these E clips


I've asked my snap on dealer and he ordered some that we thought were right but it turned out they weren't.

Has anyone found anything?

Cheers!

 

[Ole Slewfoot]

A screwdriver.

 

[JBradley500]

Like these?

http://www.amazon.com/dp/B000TGHOAE/?tag=atomicindus08-20

 

[signcrafter]

I usually just use a screwdriver or pick to remove E clips. But they do make tools for them, http://www.amazon.com/dp/B000W94UEQ/?tag=atomicindus08-20

 

[Wamsutta]

I slide the E-clip away from the post with a screwdriver and then use duckbill pliers to pull the clip the rest of the way out.

 

[richpa]

Try this tool - Facom 1813

http://befr.rs-online.com/web/p/circlip-pliers/0831078/

I have one. They are realy good and hold the clip in place so you don't drop it.

 

[Monte]

?

 

[torqueman2002]

Neiko Heavy Duty 5-Piece E-Clip Remover & Installer Set (01970A) - SAE

Amazon $16.83 Prime

 

[Moose-LandTran]

?

Those are for earless circlips:

 

[jdl25]

screwdriver

 

[G1GRANDEUR]

never bother to look for actual tool.

pocket screwdriver always worked fine.

 

[jeffmoss26]

Waldes Truarc;
https://www.google.com/url?sa=t&rct...M2pdkpqHb_okMIAPQ&sig2=QA1QEqE_-44eoqeXelLFOQ

 

[K-Dog]

Like these?

http://www.amazon.com/dp/B000TGHOAE/?tag=atomicindus08-20

Another one added to my wish list.

I effing hate this place .....

 

[K-Dog]

Try this tool - Facom 1813

http://befr.rs-online.com/web/p/circlip-pliers/0831078/

I have one. They are realy good and hold the clip in place so you don't drop it.

This one is WAY cool too. I could not find it on Amazon. I guess I gotta look elsewhere.

 

[mattblast]

Here is what I use. This one is for metric e clips and goes down to 1.5mm (measured by shaft diameter clip goes onto)

Duratrax Ultimate E-Clip Tool, 1.5mm-5mm https://www.amazon.com/dp/B001TAJP9W/?tag=atomicindus08-20

Works great for removal and installation. No more bent or lost e clips.

 

[BMack37]

Another one added to my wish list.

I effing hate this place .....

Remove it, they don't work. The jaws are too thick to get in to grab the clip.

This one is WAY cool too. I could not find it on Amazon. I guess I gotta look elsewhere.

www.amazon.com/Jonard-CS-1022-Setter-Length-Thickness/dp/B006C3TRWQ

They are ok. You really can't push the clips on very well because there isn't really anything to hold onto and the end is a little sharp to push that way. They also might be a little small for mechanics, just FYI since that's the majority of users here.

 

[Jason280]

I've always used a flat bladed screwdriver...

 

[winlinmac]

Flat nose pliers?

 

[Zeke]

This is the tool supplied for lockset c-clips:

 

[ultgar]

This one is WAY cool too. I could not find it on Amazon. I guess I gotta look elsewhere.

I keep a few Facom 1813's in stock here in the states......see http://www.ultimategarage.com/shop/part.php?products_id=6700 .

Free USPS shipping.

SD

 

[K-Dog]

Remove it, they don't work. The jaws are too thick to get in to grab the clip.

Done. I appreciate it.

www.amazon.com/Jonard-CS-1022-Setter-Length-Thickness/dp/B006C3TRWQ

They are ok. You really can't push the clips on very well because there isn't really anything to hold onto and the end is a little sharp to push that way. They also might be a little small for mechanics, just FYI since that's the majority of users here.

I added the one above your post. That looks pretty fancy, specially for the price.

 

[jeffmoss26]

Zeke, I have a few of those but almost always end up using a small flathead.