Plomb tool picture thread - show your stuff!

[Oregon rock crusher]

It is too wet for yard work here in Oregon lately and too damn cold as well. For something to do until it drys out the wife and I decided to check out a few of the local junk shops on Saturday where I found this 9920 Plomb tool tray. It's had it's hip sides rather poorly shaved to lower the handle and is beat up a bit but I don't mind that too much because it now fits in a toolmobile drawer. It may even be modified more than I think because there is no socket tray built into it either. Currently it is 19" x 7" x 3" tall. Ed.

 

[Smokeshow69]

It is too wet for yard work here in Oregon lately and too damn cold as well. For something to do until it drys out the wife and I decided to check out a few of the local junk shops on Saturday where I found this 9920 Plomb tool tray. It's had it's hip sides rather poorly shaved to lower the handle and is beat up a bit but I don't mind that too much because it now fits in a toolmobile drawer. It may even be modified more than I think because there is no socket tray built into it either. Currently it is 19" x 7" x 3" tall. Ed.

Dang, too bad it was butchered but it wouldn’t stop me from buying it [emoji38] nice find


Sent from my iPhone using The Garage Journal mobile app

 

[Provincial]

If it fits, you must buy it!

 

[RubiconJK]

It is too wet for yard work here in Oregon lately and too damn cold as well. For something to do until it drys out the wife and I decided to check out a few of the local junk shops on Saturday where I found this 9920 Plomb tool tray. It's had it's hip sides rather poorly shaved to lower the handle and is beat up a bit but I don't mind that too much because it now fits in a toolmobile drawer. It may even be modified more than I think because there is no socket tray built into it either. Currently it is 19" x 7" x 3" tall. Ed.

Very cool no matter how much it was altered. Congrats.

 

[r_olson_06]

No doubt! I don’t want to walk on my yard right now [emoji23]


Sent from my iPhone using The Garage Journal mobile app

They should easier being wet[emoji2]

It is too wet for yard work here in Oregon lately and too damn cold as well. For something to do until it drys out the wife and I decided to check out a few of the local junk shops on Saturday where I found this 9920 Plomb tool tray. It's had it's hip sides rather poorly shaved to lower the handle and is beat up a bit but I don't mind that too much because it now fits in a toolmobile drawer. It may even be modified more than I think because there is no socket tray built into it either. Currently it is 19" x 7" x 3" tall. Ed.

Nice looking tray with the stamped logo.

Looking for the following Plomb Pebbles Wrench 3061

 

[Oregon rock crusher]

Very cool no matter how much it was altered. Congrats.

I'll probably alter it again at this point to clean it up better. Nothing to loose at this point.

Dang, too bad it was butchered but it wouldn’t stop me from buying it [emoji38] nice find

"Butchered" is close to what was done to it. At least they left the Plomb stamping clean. For under $20 had to come home with me.

If it fits, you must buy it!

That's what I thought when I first saw it....Hey that just might fit!

Nice looking tray with the stamped logo.

I looked back in the catalogs and I think Plomb sold at least two tool trays with their own PN and the logo stamped in. The earlier version may have been a little wider. Most if not all were green. This is definitely a repaint. Ed.

 

[r_olson_06]

Plomb a Poluza.

6 aviation contract Crowfoot including 3 unknown to Ed's orginal list. From my understanding this is the most complete list of the K and F series tools that is public. Is anybody else into these?

A 226 with pebble handles.

A 1164 LA aka behemoth to add to the slowly progressing LA series.

And rounding out 2 LA screwdrivers thanks to a trade from Don

Looking for the following Plomb Pebbles Wrench 3061

 

[bmwrd0]

OK Smoke, you need to get down here and get to work in my Dandilion farm! Put that new bit to use.

 

[Smokeshow69]

OK Smoke, you need to get down here and get to work in my Dandilion farm! Put that new bit to use.

I have a fledgling dandelion farm tract myself so I must handle my farm work first [emoji23]


Sent from my iPhone using The Garage Journal mobile app

 

[RubiconJK]

Plomb a Poluza.

6 aviation contract Crowfoot including 3 unknown to Ed's orginal list. From my understanding this is the most complete list of the K and F series tools that is public. Is anybody else into these?

A 226 with pebble handles.

A 1164 LA aka behemoth to add to the slowly progressing LA series.

And rounding out 2 LA screwdrivers thanks to a trade from Don

WOW! These are some great adds Roy. I've never gotten into trying to collect the crowsfoot stuff. The only list I've ever seen (and the one I think you are referencing) is the one on the old Plomb web site. How much of that list have you been able to collect?

 

[r_olson_06]

WOW! These are some great adds Roy. I've never gotten into trying to collect the crowsfoot stuff. The only list I've ever seen (and the one I think you are referencing) is the one on the old Plomb web site. How much of that list have you been able to collect?

Yes the list from the Vannata Bros website. I haven't seen too many of the forum here so I am unsure if anyone is actively collecting them.
I only have 13 of them now with one duplicate.

Looking for the following Plomb Pebbles Wrench 3061

 

[Oldtuleguy]

Got a bunch of A.plombs still use at work.

 

[RubiconJK]

Yes the list from the Vannata Bros website. I haven't seen too many of the forum here so I am unsure if anyone is actively collecting them.
I only have 13 of them now with one duplicate.

I was actually referring to the list that was on Plombob's old site, but it is indeed the same as the list on the Vannata site.

 

[r_olson_06]

Got a bunch of A.plombs still use at work.

Very nice. What do you use that big of a Crowfoot for?

Looking for the following Plomb Pebbles Wrench 3061

 

[Oldtuleguy]

Have not used all of them. A few are proto LA. They have some interesting markings.

 

[RTM]

Rocketdyne, I remember that name from my youth in SoCal! Used to have a facility in Azusa I think.

 

[Oldtuleguy]

Got them a while back, I think it was California.

 

[Outlawmws]

Rocketdyne was all over the place.

 

[d42jeep]

Here are two of the three Pebble combos that I received from Roy today as part of a Plomb trade. I haven’t finished cleaning up the third one yet. Thanks, Roy! I found these other tools at an estate sale today.
-Don

 

[r_olson_06]

Here are two of the three Pebble combos that I received from Roy today as part of a Plomb trade. I haven’t finished cleaning up the third one yet. Thanks, Roy! I found these other tools at an estate sale today.
-Don

Looks good Don. You will have to post a set photo once you get the last one cleaned up.

Have not used all of them. A few are proto LA. They have some interesting markings.

Nice looking A Plomb stuff.

Looking for the following Plomb Pebbles Wrench 3061

 

[d42jeep]

Looks good Don. You will have to post a set photo once you get the last one cleaned up.

Roy,
Here they are. I took a shot of my slowly growing flare nut wrench set too.
-Don

 

[Catfishdan]

Roy,
Here they are. I took a shot of my slowly growing flare nut wrench set too.
-Don

Are you missing the 1210 5/16” pebble?

 

[d42jeep]

I didn’t know I was missing it but I don’t have one. I was just happy to find a 3/8” one recently and Roy traded me a few others to get to where I am now.
-Don

 

[Smokeshow69]

I didn’t know I was missing it but I don’t have one. I was just happy to find a 3/8” one recently and Roy traded me a few others to get to where I am now.

-Don

You are missing the 1210. I got you. Email inbound!


Sent from my iPhone using The Garage Journal mobile app

 

[d42jeep]

You are missing the 1210. I got you. Pm inbound


Sent from my iPhone using The Garage Journal mobile app

I think Catfish Dan beat you to it but Thanks! I’ve never run across one of those small ones.
-Don

 

[Catfishdan]

I’ve found several of the 1210’s and 1212’s. It’s the big guys I never see.

 

[Smokeshow69]

I think Catfish Dan beat you to it but Thanks! I’ve never run across one of those small ones.

-Don

Seems I have been catfished [emoji23]


Sent from my iPhone using The Garage Journal mobile app

 

[tym]

I’ve found several of the 1210’s and 1212’s. It’s the big guys I never see.

Any big guys you're seeking? I can dig through my spares...

 

[r_olson_06]

I’ve found several of the 1210’s and 1212’s. It’s the big guys I never see.

I think I have (3) 1246 1-7/16"

Looking for the following Plomb Pebbles Wrench 3061

 

[Smokeshow69]

I think I have (3) 1246 1-7/16"

Looking for the following Plomb Pebbles Wrench 3061

[emoji15] dang , I wish I would have known so I could have combined shipping [emoji28]


Sent from my iPhone using The Garage Journal mobile app

 

[Catfishdan]

Any big guys you're seeking? I can dig through my spares...

I’ve got up to 1&1/4”, so I guess I’m missing 1242, 1244, and 1246. Much appreciated!

 

[Catfishdan]

I think I have (3) 1246 1-7/16"

Looking for the following Plomb Pebbles Wrench 3061

Pm sent!

 

[tym]

I’ve got up to 1&1/4”, so I guess I’m missing 1242, 1244, and 1246. Much appreciated!

Rats...my collection of pebble combos tops out at 1".

 

[Garage.Girl]

Figured I would finally update my lil PLVMB collection... this is not all of my PLVMB tools that will be an upcoming post, only the wrench sets Im actively working on only 8 left on my combination set and 20 DBE to go...

 

[r_olson_06]

Figured I would finally update my lil PLVMB collection... this is not all of my PLVMB tools that will be an upcoming post, only the wrench sets Im actively working on only 8 left on my combination set and 20 DBE to go...

You are well on your way. Keep up the good work.

Looking for the following Plomb Pebbles Wrench 3061

 

[r_olson_06]

Thanks to a trade from the from world famious Lugsonian I have added a 3/8" X 1/4" deep well socket.

After adding it to the master inventory sheet I realized that this put me over the 1,500 Plomb mark! Sights set on the 2K mark.

Thanks Lugz

Looking for the following Plomb Pebbles Wrench 3061

 

[r_olson_06]

Added a few more today. A 3/8" flare pebble and the ever elusive star nut wrench that I had no idea was a brake spoon.

Looking for the following Plomb Pebbles Wrench 3061

 

[Private Lugnutz]

I realized that this put me over the 1,500 Plomb mark!...[ ]...Thanks Lugz

Proud to have contributed in a small way to the ̶i̶n̶s̶a̶n̶i̶t̶y̶ achievement!

 

[Outlawmws]

Proud to have contributed in a small way to the ̶i̶n̶s̶a̶n̶i̶t̶y̶ addiction!

Fixed it more!

 

[d42jeep]

I didn’t know they were elusive. I found mine in the wild last March. I usually pick up brake spoons for my neighbor’s collection but I hung on to this one!
-Don