To avoid these ads, REGISTER NOW!

Pool Deck Layout

Smiles79

Well-known member
Joined
Feb 15, 2018
Messages
290
Location
Northwest Missouri
Not sure if this is the best place for this thread, but you guys are awfully handy so I figured I could get some good info.

I've got a 25' round above ground pool I'd like to build a deck around. I plan on pouring some kind of footer for the posts to sit on and back filling with dirt. I considered pouring piers but that seems considerably more to expensive. I'm open to suggestions here.

How does the layout and material list look? I'm mainly curious about the size and spacing of my posts and joists. I'm not used to making these kind of prints, so please tell me what I'm missing.

 
To avoid these ads, REGISTER NOW!

D45

Well-known member
Joined
Mar 21, 2014
Messages
4,836
Location
NW INDIANA
Yes mine was built around a 24' round above ground

Thankfully before lumber prices skyrocketed

It was a very fun project and is rock solid
 

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
5,035
Location
long island ny
I did a full deck around our above ground, used two piers at each post with an inner and outer beam. At the entrance from the main deck I did a 10 x 16 lounge area. It's great to have the deck around the entire pool if you can.
 

Attachments

  • 20180720_104140.jpg
    20180720_104140.jpg
    1.2 MB · Views: 24
  • 20180720_104152.jpg
    20180720_104152.jpg
    1.1 MB · Views: 24
To avoid these ads, REGISTER NOW!

KansasArt

Well-known member
Joined
Jan 29, 2020
Messages
282
Location
Kansas
I had one around our 24’ above ground pool. Probably about 1/2 way around. I sunk 4X4’s about every 4 feet around the perimeter. To those I bolted 2X? to act as support beams. The joists rested on the beams. The 5/4 deck boards on the joists ran just under the pool coping. It took a lot of measuring as to where the beams were placed to ensure the deck boards were placed snugly under the coping. A lot of trial and error to place a normally square object (deck) around a round pool. It turned out great. Lasted about 15 years. Rock solid until the end. The biggest problem? Wasp building nests under the deck. I tore it out last fall, I counted over 20 paper wasp nests about the size of a grapefruit. They must have been pretty docile as we probably only had 1 sting a year. Good luck with your project!
 
OP
S

Smiles79

Well-known member
Joined
Feb 15, 2018
Messages
290
Location
Northwest Missouri
Download and read this. It has everything you need to know about designing the structure

American Wood Council
DCA6 Prescriptive Residential Wood Deck Construction Guide Based on 2015 IRC https://awc.org/wp-content/uploads/2022/02/AWC-DCA62015-DeckGuide-1804.pdf
I actually had someone else recommend that to me, thank you!
I've made some updates, and am working on some more. If anyone is interested, here is a link to the pdf and solidworks files:

 
To avoid these ads, REGISTER NOW!
Top Bottom