Portable roller stand

[skipnay]

Anyone ever see this? Would come in handy if you have a bench bandsaw. This would work for the chop saws also. Maybe someone else has seen something like it that is just as good. But for $50 and american made. It probably will be hard to beat. If this isn't in the right place please move it...

Portable roller stand

It's the one on the far right.

 

[Aquamoose]

I'm thinking a block of wood with neoprene on top provides good support in all directions, not linear. Rollers have a finicky way of shifting the wood when not perfectly aligned.


Sent from my iPhone using Tapatalk

 

[crewchief888]

i have a couple of HF roller stands.

for the price, they work just fine with the table saw, miter saw and abrasive chop saw.

 

[6PTsocket]

They are common in industry. We had a big one off the end of a conveyer belt. Ours was adjustable in length andwas a pantoghaph design like the thing that holds the boxing glove in cartoons.

Sent from my SM-G900V using Tapatalk

 

[skipnay]

This is for a counter top chop saw or bandsaw. This would come in handy I think for me. This is mostly for metal for me. I use a 4x4 block of wood. It just seems like it wants to roll. It's more of a pita then anything. I can't just cut a pull. It drags way to much and been thinking an easy way of doing this but I might have to settle for this.

 

[jeeper46]

i have a couple of HF roller stands.

for the price, they work just fine with the table saw, miter saw and abrasive chop saw.

I have one for use with my miter saw,too. very handy-I was using it today to cut some door casing trim

 

[gungatim]

I prefer the collapsible ones as they are much easier to store and take up less space. I had a pair like those but got rid of them because they were always in the way. the fold up's aren't the most heavy duty, and you need to add a chain so they don't open too far (the weight can stress the flip out leg if you are feeding really heavy slabs into a planer).

mine were from woodcraft but similar to these from HF at 2x the price. craftsman sells them too.

http://www.harborfreight.com/132-lb-capacity-roller-stand-68898.html

 

[dirt_dobber]

I've got the HF also - they work great.

 

[skipnay]

How are you using that on a bench?

 

[jeeper46]

How are you using that on a bench?

My miter saw is mounted on a table, but the roller stand is next to the table, on the floor.