Power Probe accessory needed

[johninct]

Does anyone make a wire with alligator clamp that can be used in place of a power probe tip? 5' or even more would be nice. I am working with 24 volt and need something more than DMM leads.

 

[signcrafter]

I have a set of test lead adapters. Not cheap but I use them all the time. Thet are all 4mm banana jack connectors which us what the power probe is also. So I can plug the extension lead into PP and the put alligator or back probe or whatever specific adapter tip i need on it. I also have a drawer full of 4mm stuff I've bought on Amazon and Ebay. Different adapters and a roll of silicone wire so i can make my own adapters as needed.

https://www.grainger.com/product/1EKN6?gucid=N:N:PS:Paid:GGL:CSM-2293:99F1R6:20501231&gclid=Cj0KCQjwhsmaBhCvARIsAIbEbH79lufhwH7xl4Gv0ReUN7h-HqF0E4Uxx1wUXZdzKVlnS99RFc2BvAEaAjwZEALw_wcB&gclsrc=aw.ds

Test Leads Set, 22 in 1 Multimeter Test Leads with Electrical Alligator Clips, Soft Silicone Test Leads Probes https://www.amazon.com/dp/B071JM6VRL/?tag=atomicindus08-20

 

[rancherbill]

Something like this is super handy.

https://www.amazon.ca/dp/B01MUJMYON/?tag=atomicindus04-20

Buy or make something like this. The set I made used an old lamp cord so it wouldn't tangle as much and some salvaged alligator clips.
https://www.digikey.ca/en/products/detail/pomona-electronics/5908A/737474?utm_adgroup=Test and Measurement&utm_source=google&utm_medium=cpc&utm_campaign=Shopping_Supplier_Pomona Electronics_0501_Co-op&utm_term=&utm_content=Test and Measurement&productid=737474&gclid=Cj0KCQjwhsmaBhCvARIsAIbEbH4SY8r6wZvAgvzvKm1moJr36wyLKCmcFMkEnWspmJ8gEtyS1-hoV2waAkxXEALw_wcB