To avoid these ads, REGISTER NOW!

Prepping the floor - how to keep walls dry??

REFLEXX

Well-known member
Joined
Aug 14, 2005
Messages
913
Location
Riverside, CA
Gents,

I'm drywalling the garage and the epoxy will be the last step. How did you keep the water out from under/in the drywall? Did you mask or tape it?

any suggestions???

thanks,

REFLEXX :thumbup:
 
To avoid these ads, REGISTER NOW!

Satatic

Well-known member
Joined
Jan 12, 2005
Messages
425
Location
Bourbonnais, Illinois
Hmmm drywall all the way to the floor eh? I think I would go with some sylicone all around the bottom like a bathtub. Then maybe some waterproofing type paint around the bottom few feet.
 
To avoid these ads, REGISTER NOW!

ChucksCrib

Well-known member
Joined
Mar 28, 2005
Messages
545
Location
Connectivette
I bought a roll of .004 vinyl from HD and thumbtacked it up on the walls and let it hang down to the concrete portion of the walls( about 1.5 feet of concrete)

I also decided to epoxy my floor before I sanded the joint compound on my walls. It was very easy to vacuum the dust up off of the epoxied floor as opposed to trying to vacuum it up from bare concrete.
 
To avoid these ads, REGISTER NOW!
Top Bottom