Project update, pending clear coat

[davaldez21]

I did my 2nd coat today,made a big difference from the first coat.
As far as the flakes do I sweep up first or use a blower to pick up loose flakes or do I roll the clear on top with loose flakes?

 

[benwah]

Remove loose flakes before applying your clear..

 

[Garage Flooring]

Remove loose flakes before applying your clear..

+ 1,000,000

On that note, I use a floor attachment on a shop vac and a little pressure to make sure I have knocked down anything that landed on edge

 

[davaldez21]

Sounds good thanks

 

[all go]

looks good. Did you use the same epoxy on the sides of the walls under your baseboard? What clear did you end up buying to go over the rustoleum?

 

[LegacyIndustrial]

+ 1,000,000



On that note, I use a floor attachment on a shop vac and a little pressure to make sure I have knocked down anything that landed on edge

Be careful of this practice. The black plastic nozzle is famous for leaving marks on the floor. Tape the end with duct tape to protect the floor.


Sent from my iPhone using Tapatalk

 

[Garage Flooring]

Be careful of this practice. The black plastic nozzle is famous for leaving marks on the floor. Tape the end with duct tape to protect the floor.


Sent from my iPhone using Tapatalk

I have not personally had that issue but that is a great point. We use the dustless product and its done well but I could definitely see how this could be an issue