To avoid these ads, REGISTER NOW!

Putting down floor insulation

Horses Ghost

Well-known member
Joined
Feb 25, 2009
Messages
78
Location
Bismarck ND
I hope this isn't a dumb question that I am trying to overthink. Which direction should I lay my 2" hd250 foam sheeting so my floor will properly drain. The concrete guy was here today and prepped the floor so I can put everything down for the insulation and pex. Does it make a difference which way the sheets lay so the slope will work better to the box floor drains I have? Thanks for all the help.......Mark
 

Attachments

  • Garage 003.jpg
    Garage 003.jpg
    144.7 KB · Views: 94
  • Garage 007.jpg
    Garage 007.jpg
    143.9 KB · Views: 72
To avoid these ads, REGISTER NOW!

jolakki

Member
Joined
Oct 14, 2007
Messages
16
Which direction should I lay my 2" hd250 foam sheeting so my floor will properly drain. The concrete guy was here today and prepped the floor so I can put everything down for the insulation and pex. Does it make a difference which way the sheets lay so the slope will work better to the box floor drains I have? Thanks for all the help.......Mark

I dont quite understand what you mean by draining, since those sheets will be under the concrete.
Concrete guy will level the floor so the water goes into those floor drains.
Doesnt matter which way you lay them.
Use the direction that needs less cutting of those foam sheets.
 

Bigrhamr

Well-known member
Joined
Apr 16, 2009
Messages
293
Location
North Idaho
Yes you are over thinking it which is something I do a lot of. Whatever direction makes the least work fitting the panels is fine.
Not to be overly critical but I'll second the comment about the compaction needing work. When you're putting foam down the subgrade needs to look just about like a concrete floor before you cover it up. Otherwise you'll have
voids under the foam and the weight of the concrete is not enough to make the foam conform to the rough surface. Then you'll be relying on the strength of the concrete and whatever rebar you use to support any load you put on the floor. Might get away with it, might not but you are definitely giving up a lot of strength to do it that way. I'd rake that sand smooth, water it down and run a plate compactor over it a few times. Even though this part gets covered up it's well worth being picky over it.
 
To avoid these ads, REGISTER NOW!

cortez

Well-known member
Joined
Apr 9, 2009
Messages
171
Location
Chicago
It seems like our destiny as humans is to over think and under think things at random.

When you get past retirement age this becomes absolutely clear!!!
 

GearBeer

Well-known member
Joined
Jun 12, 2009
Messages
252
I agree with all of the above, with one additional point. Do yourself a favor and compact the dirt yourself. No contractor you hire is going to willfully put the effort into compacting it sufficiently; it's a crappy, time consuming job that eliminates their opportunity for repeat business. Go rent a compactor and spend an evening or a half day running it around and around and around and around and... you get the point.

EDIT: And don't forget the corners! You may need to add material there, it's worth the time and effort.
 
To avoid these ads, REGISTER NOW!
Top Bottom