To avoid these ads, REGISTER NOW!

quick disconnect for grease hose?

lightning02

Well-known member
Joined
Jul 29, 2013
Messages
2,677
does anyone know where online i can buy quick disconnects for grease hose? basically the same thing like you would use on a air hose but made for a grease hose? i want to be able to remove mine and gun for easy of storing and moving since i have a 75ft hose.

links if you have.
 
To avoid these ads, REGISTER NOW!

Snakebyt

Well-known member
Joined
Sep 2, 2014
Messages
1,075
Location
Lubbock Tx
Ahhh.. that makes more sense, While i cant help you out, i have seen one on a grease gun in the past, but this was years ago and the gun was no telling how old.
 

crane operator

Well-known member
Joined
Jul 1, 2016
Messages
307
Location
sw missouri
I would think you would be better off with a set of hydraulic quick disconnect hose couplers, rather than air hose connectors.

That way when you unhooked it wouldn't be leaking grease out the one disconnected end.

Go to a hydraulic shop and pick what you want.
 
To avoid these ads, REGISTER NOW!

WWheeler

Well-known member
Joined
Jun 23, 2015
Messages
4,105
Location
Middleofnowhere USA
I would think you would be better off with a set of hydraulic quick disconnect hose couplers, rather than air hose connectors.

That way when you unhooked it wouldn't be leaking grease out the one disconnected end.

Go to a hydraulic shop and pick what you want.
This. Should be able to stop in any hydraulic supply and explain what you're wanting to do.

If it were me if I could I'd take the hose off and take it with me to show them exactly what threaded ends I needed the couplers to have.
 
OP
L

lightning02

Well-known member
Joined
Jul 29, 2013
Messages
2,677
I would think you would be better off with a set of hydraulic quick disconnect hose couplers, rather than air hose connectors.

That way when you unhooked it wouldn't be leaking grease out the one disconnected end.

Go to a hydraulic shop and pick what you want.

This. Should be able to stop in any hydraulic supply and explain what you're wanting to do.

If it were me if I could I'd take the hose off and take it with me to show them exactly what threaded ends I needed the couplers to have.

ok ill give this idea a try.
 

pete379

Well-known member
Joined
Dec 4, 2009
Messages
471
i made a hose hanger (like garden hose,but smaller) hang on side of the quarter drum (120 lb grease)
 
To avoid these ads, REGISTER NOW!
Top Bottom