fastrucken1
Well-known member
So I tried to use the visual-3d tool but I cant figure out how to use it with scissor trusses and didn't see any other layouts with a vaulted ceiling.
My shop is 30'w by 48'l with 2 garage doors at the gable end (the 30' side) with a white ceiling and white walls. The walls are 12ft and the scissor trusses are 4/12 pitch which puts the middle of the ceiling at 16'8". My Lighting plan is to run 4 rows of 9 maybe 10 lights t8 fixtures with led bulbs. The outer rows about 5' from the walls (approx 13 ft high) then the second row 6' from the first row(about 15' high). This will allow me to have a ceiling fan with out strobbing too bad.
Any input would be appreciated. P.S. i thought against highbays because firs row of light would be too low and possibly to few light sources that creates more shadows.
My shop is 30'w by 48'l with 2 garage doors at the gable end (the 30' side) with a white ceiling and white walls. The walls are 12ft and the scissor trusses are 4/12 pitch which puts the middle of the ceiling at 16'8". My Lighting plan is to run 4 rows of 9 maybe 10 lights t8 fixtures with led bulbs. The outer rows about 5' from the walls (approx 13 ft high) then the second row 6' from the first row(about 15' high). This will allow me to have a ceiling fan with out strobbing too bad.
Any input would be appreciated. P.S. i thought against highbays because firs row of light would be too low and possibly to few light sources that creates more shadows.