quick question about legacy stander primer

[bigrich954rr]

Just mixed Legacy stander primer for 7 mins
poured down the edges of walls on floor and down the center then rolled on.

Left the primer on the bottom and sides of bucket in bucket so not to get any unmixed stuff on floor (didn't scrap the bucket clean )


The primer is thicker near edges and some spots near middle Good thing is the whole floor is a nice gray color.


will the thicker spots cure faster ?
will the thinner spots or thicker spots be a issues ?

 

[Shea]

What you see is typical of primers. You most likely have some areas of the floor that are more porous than others. It allows the primer to soak in a little more making those areas look thinner and the floor blotchy. It should all cure around the same time without issues.

 

[bigrich954rr]

Sweet thank you so far it drying pretty good its just a little tacky now
I will be waiting another 4 hours and putting epoxy down

Thank you for making me feel better about the patchy look while wet

 

[LegacyIndustrial]

Shea is on the money. Primer coat is the ugly coat.


Sent from my iPhone using Tapatalk