Racedeck Freeflow question

[SuperPollito]

I’m getting ready to install Racedeck Freeflow in my garage and have realized my staggered garage doors are going to be a problem. No matter how I space the tiles, one of the doors is going to have a ~6-8” gap of ugly bare concrete between the edging and the door.

Is there any way to cut the tile but still attach the edging?

Thanks!

 

[Jakesnake317]

Creative trimming. You could stencil the area with a pencil then trace with tape and transfer..pics would help with suggestions

Sent from my SCH-I605 using Tapatalk

 

[OCJohn]

Is there any way to cut the tile but still attach the edging?

Cut it with a table saw and just run the edge flush inside the door opening?

 

[SuperPollito]

So in this picture, the garage doors are along the bottom edge - one in the lower left corner, and the other one in the middle where the first “hump” is. The solid black are walls/garage door where tile needs to be trimmed. Orange is outside the house and can be ignored.

 

[Shea]

Instead of using the black plastic ramps, you can use a diamond plate transition strip instead. That way you don't have to worry about trimming the tiles. Take a look at this site to get an idea. You may want to call them for more info.

https://www.tread-ware.com/

 

[RaceDeck1]

hi -

Drop us a line and we can work with you on the designer, and come up with some creative edging solutions along the doors

 

[Jakesnake317]

Transition strips sounds ideal