To avoid these ads, REGISTER NOW!

RaceDeck Install Complete

bruincup

Active member
Joined
Feb 18, 2014
Messages
28
Location
Alberta, Canada
Just completed installing our tiles this past weekend. We went with a Solid Graphite border with Alloy Free Flow in the middle and through the opening of the door. I must say that I read enough about this product on this forum and was cautious of the hype. I can now say that I'm very happy with the quality of the tile and the ease of installation. I'm real happy with the look and functionality of both the Solid and Free Flow tile. I was a little worried about the tiles ''clicking'' when walking on them, so far this is not a problem. I would also like to say the entire process of selecting the floor, emailing back and forth as well as the phone calls was painless. This is a company that has their customer service figured out. Very happy with the floor. :thumbup:
 

Attachments

  • IMG_20140920_082826.jpg
    IMG_20140920_082826.jpg
    138.9 KB · Views: 182
  • IMG_20140920_192707.jpg
    IMG_20140920_192707.jpg
    145.3 KB · Views: 185
  • IMG_20140920_192826.jpg
    IMG_20140920_192826.jpg
    148.8 KB · Views: 219
  • IMG_20140920_192721.jpg
    IMG_20140920_192721.jpg
    144.5 KB · Views: 214
  • IMG_20140920_192650.jpg
    IMG_20140920_192650.jpg
    148.6 KB · Views: 225
  • IMG_20140920_191402.jpg
    IMG_20140920_191402.jpg
    148.5 KB · Views: 210
  • IMG_20140920_191301.jpg
    IMG_20140920_191301.jpg
    147.6 KB · Views: 219
To avoid these ads, REGISTER NOW!

Scooter70

Well-known member
Joined
Dec 27, 2013
Messages
52
Location
Southeast Michigan
That looks great. Would you mind posting a photo looking straight down at the FreeFlow tiles? Everyone takes photos looking outward so I've never seen what they look like looking down (how much of the floor underneath can be seen).
Thanks.
 

TAMPAGT07

Well-known member
Joined
Feb 20, 2008
Messages
11,147
Location
Palm Harbor, Fl
Garage looks awesome... Now you just gotta clean up that mess in the driveway, before your neighbors run you out of town..:lol_hitti
 

Attachments

  • IMG_20140920_192826.jpg
    IMG_20140920_192826.jpg
    132.2 KB · Views: 85
To avoid these ads, REGISTER NOW!
OP
B

bruincup

Active member
Joined
Feb 18, 2014
Messages
28
Location
Alberta, Canada
That looks great. Would you mind posting a photo looking straight down at the FreeFlow tiles? Everyone takes photos looking outward so I've never seen what they look like looking down (how much of the floor underneath can be seen).
Thanks.

Scooter, you may not see much of my floor beneath the FreeFlow tiles. Before installing the RaceDeck tiles I painted the floor and it turned out to be just about the same color. The first two pics are of the Alloy FreeFlow and the third is of the Graphite FreeFlow. Not real great pics, tried several times to get better but camera on the tablet kinda ***** I guess.
 

Attachments

  • IMG_20140923_181757.jpg
    IMG_20140923_181757.jpg
    158.9 KB · Views: 88
  • IMG_20140923_181805.jpg
    IMG_20140923_181805.jpg
    150.1 KB · Views: 72
  • IMG_20140923_181824.jpg
    IMG_20140923_181824.jpg
    158.6 KB · Views: 79
OP
B

bruincup

Active member
Joined
Feb 18, 2014
Messages
28
Location
Alberta, Canada
Looks great.... how do you like the combo of standard and free flow tiles?

Magic, At first I wanted to have the Solid tile around the edge with the FF in the middle area where the car is parked. Then the more I read about the FF the more I liked the idea of doing the whole garage. In the end, I decided to go with my original plan and am very happy I did. The combination of the two different tiles is way more practical for what we do in our garage and I think it has a unique look.
 

James-W

Well-known member
Joined
Feb 3, 2013
Messages
12,432
Location
Southeastern Wisconsin
Looks really nice! More and more I am thinking of going this route. I have to wait until I get the basement done though. That project is at a standstill right now, the wife is having some medical issues and I am busy taking her to different appointments to get her taken care of.
 
OP
B

bruincup

Active member
Joined
Feb 18, 2014
Messages
28
Location
Alberta, Canada
Looks really nice! More and more I am thinking of going this route. I have to wait until I get the basement done though. That project is at a standstill right now, the wife is having some medical issues and I am busy taking her to different appointments to get her taken care of.

James W, I hope all is well and your wife gets better.

go easy man, bruincup.
 

RaceDeck1

Well-known member
Joined
Oct 8, 2007
Messages
3,001
Location
Salt Lake City , Utah
Scooter, you may not see much of my floor beneath the FreeFlow tiles. Before installing the RaceDeck tiles I painted the floor and it turned out to be just about the same color. The first two pics are of the Alloy FreeFlow and the third is of the Graphite FreeFlow. Not real great pics, tried several times to get better but camera on the tablet kinda ***** I guess.

great shots of your garage, thanks for sharing!
 
To avoid these ads, REGISTER NOW!
Top Bottom