Racedeck Where To Purchase?
- Thread starter sixty4
- Start date
As they did not have any distributers in Minnesota, I purchased directly from RaceDeck. Paid $2.99 each for the standard DIAMOND 12x12 tiles. Less for the FREE-FLOW tiles and edge pieces. From what I have read, $2.99 per square seems to be a very common price for RaceDeck.
I called RaceDeck last week and mentioned that I was garagejournal forum member, and they offered me a 10% discount on a 600 sq ft job. With shipping and edges, the total cost came in around $3.30 sq ft. as follows: (1) Diamond Patern 12x12 $2.99 less 10% discount equals $2.69 times 600 sq ft - $1,614, (2) 28 ft. of edging at $2/ft - $56, (3) shipping and handling - $308. Total of $1,978 for 600 sq. ft = $3.30 / sq ft all in.
As an alternative, Motofloor (the Costco brand) is currently on sale for $99/kit plus $15 shipping. Each kit covers 48 sq. ft.. In addition a trim/finish package is available for $70/kit (including shipping) and includes 20 linear ft. of trim plus 12 extra tiles. So depending upon your waste the cost is around $2.50 to $2.75 per sq. ft.
Side note: I like the fact that the head of Racedeck comes on here and posts about their products (without sounding like it's an advertisement). If I were looking to buy their products, I would be sending him an e-mail or private message direct.
astondb9
Active member
Costco sometimes.
RaceDeck1
Well-known member
You can always call us direct at 800-457-0174 ( 801-746-0143 ) and be sure to mention you are a member of The Garage Journal. 
You can always call us direct at 800-457-0174 ( 801-746-0143 ) and be sure to mention you are a member of The Garage Journal.
I close on my new house the 20th. I will call the 21st!
Thanks!!!!
Sixty4...
