To avoid these ads, REGISTER NOW!

Rant article on Jalopnik about Harbor Freight

bmwohio

Well-known member
Joined
Jul 8, 2010
Messages
366
Location
Columbus, OH
A little something to lighten your day:

http://jalopnik.com/5959822/i-love-...ource=jalopnik_facebook&utm_medium=socialflow

I Love You Harbor Freight, But You Smell Like Plastic Hell
Mike Spinelli

As I'm typing this, somewhere nearby is a transmission jack that I own. There's also a mini tire changer and a portable wheel balancer and a five-ton gear puller. Five tons! That's a frigload of tons!

Someday I may use these tools for the purposes intended, but if I don't, so what? I bought them at Harbor Freight, which means no one would care if I used them at all. Least of all, perhaps, me. And it's probably safer that way.
Harbor Freight is a national chain of discount tool stores that's become an obsession among the tool-crazed of every mechanical ilk. It's both Greek Agora and Santa Claus of hardware, a giant, bottomless toybox to satisfy any impulsive DIY fantasy for alarmingly few dollars. Did I mention I have a 24" Pittsburgh-brand crescent wrench with a head the size of Ron Perlman's fist? Goddamn straight I do. I think it was 20 bucks. Anyone have a drawbridge that needs dismantling, I'm your guy.

Our brains are hard-wired to love tools. We love them for what we can do with them, as well as for what we wish we were doing with them right now. Sure we can slap on a set of brake pads, but sometimes we just want to sit Indian-style among a crapload of cheap tools dreaming of Keith Duckworth coaxing 10 extra horses out of a Double Four Valve. Harbor Freight is where this kind of wishful thinking meets actual utility.

Harbor Freight's tools are so cheap, they've changed the whole dynamic of tool ownership. In the old days, if you needed a tool you didn't have, you'd call a friend and say something like, "Hey man, can I borrow your impact wrench?" And he'd say, "*******, you still have my impact wrench from the last time you borrowed it." Now, you'd just go to Harbor Freight and buy six or seven impact wrenches, then go home and build an impact-wrench-powered go-kart.

Indeed, Harbor Freight's killer app is access to the kind and quantity of tools a part-time mechanic might never have considered buying. Pre-Harbor Freight, you'd say things like, "Buy an engine hoist? Do I look like Mister ******* Goodwrench?" Now you'll pick up a couple, plus a rolling engine stand — for the price of screwdriver set from Snap On — so you could pull the F22B out of your wife's old Honda Accord and smash it through the wall of the sun porch while drunk.

Here's a perfect example: Harbor Freight sells a portable scissor lift that can hoist a 6,000-pound car — all four wheels off the ground. It costs $1,200, which is a lot for a tool, but not a lot for a lift. Think of the convenience: You set up the lift in the morning, drop your car's subframe by noon, and be released from the hospital six weeks later, minus a foot.


You see, Harbor Freight's tools, while cheap and often flimsy, are reasonably useful. They're robust enough for at least one serious use before breaking. Sometimes, Harbor Freight tools don't work at all, and that provides a tantalizing bit of dramatic tension. Will this $5 brake bleeder douse me in fluid? Who cares? It's five bucks, and I just bought 38 of them. Know what you're getting for your birthday this year? Maybe a bath in brake fluid, maybe a workable one-man brake bleeder. Cross your fingers. Or at least, count them.

Although Harbor Freight's mission is purportedly to stretch your tool-buying dollar, the best thing about it is the sheer acquisitive joy. Imagine you're a kid on a museum field trip with a $50 bill your dad that morning stuffed into your hand on the way out the door. (Shhh. He thought it was a five). After a gift-shop ****, you run home with a bag of cheap, amazing ****. Now, if you compared the cost of those keychains, polished rocks and rubber-band-powered grist mills to the value of love bursting from your heart, it would have microwaved Milton Friedman's skull. Harbor Freight's value proposition is exactly the same, only for grown-ups with credit cards.

The reason they're so cheap is that Harbor Freight tools are made — mostly in China — of a kind of bargain plastic that sublimates directly from solid to a gas, like dry ice, losing their mass year after year in a pungent waft of formaldehyde and pickled sea cucumber. I'll bet if you put a Harbor Freight 12V grease gun in a time capsule, 50 years later you'd find just a pile of lithium and an on-off switch.

One day we may find out the Chinese have been intentionally fouling the sperm of American males with something sinister in those outgases, making our offsprings' heads get all misshapen like that Forever Alone guy from the Internet. It wouldn't matter. That smell of plastics laden with phthalic acid — which chemists use as "plasticizers," softening agents added to make plastic tools more flexible and durable — is like bath salts to Harbor Freight toolheads. To them, that pungent, plasticky scent is like freshly cut grass or the yeasty aroma from a pub doorway on a Saturday evening. When it comes to aromatic hydrocarbons, teenaged glue sniffers in the '70s had nothing on Harbor Freight denizens.

As the quality of consumer products go, Harbor Freight tools fit somewhere between the junk you buy absent-mindedly while waiting at the car wash and Sears's Craftsman line. But if you're only going to use your drill press in anger, say, twice a year, the cost-benefit works out. And many, many people do get good use out of the stuff they buy at Harbor Freight, even when they actually use it. Maybe they couldn't run a commercial shop on Harbor Freight merch, but that's what the higher-priced stuff is for.

When I bought the jack, the balancer, the wrench, and the other stuff I've accumulated from Harbor Freight I swear I had the best of intentions. Perhaps I was lured by the promise of a particularly **** kind of extreme automotive utility, which sounds ***** enough to be an actual thing. Call it temporary chemical psychosis, brought on by delusions of grandeur and mild asphyxiation. Keith Duckworth would be appalled.
 
Last edited:
To avoid these ads, REGISTER NOW!

ddawg16

Well-known member
Joined
Jul 11, 2008
Messages
21,005
Location
S. California
Hmmmm.......I think the guy needs a life instead of spending so much time ranting....

With that said......

They are opening up a HF store about 2 miles from me.....basically, it will be between us and the inlaws.....believe it or not, my wife is more excited about it....she does a lot of painting and loves their cheap brushes....she uses them to paint the background of a mural....then just tosses them away....
 

Notwerk

Well-known member
Joined
May 11, 2011
Messages
329
Horrifically and hilariously true. I'm simultaneously appalled and amused.
 
To avoid these ads, REGISTER NOW!

Armed Bear

Well-known member
Joined
Nov 6, 2012
Messages
265
Location
California
28116841.jpg
 

Vegaman_Dan

Well-known member
Joined
Jun 1, 2012
Messages
2,453
Location
Pacific, WA
Is HF "Good" or "Good Enough"?

For my needs, often it has what I need at the time, or close enough that I don't modifying it to match my needs. Taking a welder to a set of Vise-Grips to make a custom flanging tool seems crazy, but to a set of $4 ($2 on sale!) set of the same style locking pliers from HF? I know which one I'm going to kitbash and which will be safe in the tool box for real Vise-Grip work.

Like any tool or material, it's worth what you'll pay for it. Don't go in with a closed mind and you might be open to new opportunities. Just because the label on the package says it's a 9 LED battery powered flashlight for $2 doesn't mean it has to stay that way. A couple of zip ties and you have a nice high intensity LED work spotlight attachment for your MIG torch. If it gets damaged- darn. Good thing they come in two packs, eh?

It's like they are a sampler store. Try different things. If you find you use something a lot, perhaps it's time to step up and get the pro quality version for even more happiness. If not, then you wouldn't have made good use of the more expensive version anyways.

I like to try it all. Exposure to new tools, new materials, new techniques and methods. You learn by doing and using what is available is one such way.
 

zakmartin

Well-known member
Joined
Jul 3, 2012
Messages
620
Location
Seattle, WA
Mike Spinelli looks like a girl my best friend used to date in high school. She was Italian and very hairy. She played the trombone in intermediate band.

He is, however, a very smart writer and his columns on Jalopnik and his Drive channel videos on YouTube are generally spot-on and always entertaining. He's sort of like Ezra Dyer, only more hair.
 
To avoid these ads, REGISTER NOW!
Top Bottom