Ratchet junkies: 1/2 flex 11 inch or under ?

[DBendr]

I was looking at Facom S.143A 1/2 flex and they "seem" to be 10.5 OAL. That said sometiomes they list shipping length or package length( head folded 90*).
Anyone have one to measure AOL max ? If it's 10.5 I may grab one....probably.

Or who else makes a 1/2 flex that's 11 or under ? I have a couple of thirteend but a 10 would have been great earlier this morning. 8-9 would be better yet.
Yes. I have a saw and belt sander

Obviously it's a tight area so something close to fine(40 plus tooth) is best. No 24 or 30 for these.

 

[DBendr]

Slackers ! 50 views and nothing ?
Wera Zyclops is 11 1/8 overall.
I'd rather have shorty slammed in a car door than be caught with one of those.
Hazet has a 916GK about 11" ???( top secret guess from Amazon.de.)
32 teeth ( feels like 18).Yes. I own a 916. Basically garbage.1920 ratchet with a techno hanle.My ancient Walden is far superior.

Off to haunt some Japanese sites.

 

[bart1]

Normally I behead those who insult hazet, but I'll help you out.

https://store.snapon.com/Dual-80-17...e-80-Tooth-Stubby-Handle-Ratchet-P651019.aspx

Use the google for several other options. Some quite cheap if that's what you want.

 

[PJNJ]

Husky at Home Depot -
http://www.homedepot.com/p/Husky-1-2-in-Flex-Head-72-Tooth-Ratchet-H12FPFRAT/202923407

Harbor Freight, looks short -
http://www.harborfreight.com/12-in-drive-professional-flex-head-ratchet-62320.html

Maybe short enough -
http://www.harborfreight.com/1-2-half-inch-quick-release-swivel-head-ratchet-96783.html

 

[DBendr]

Snappy is a fat boy. Husky.....nah.
Ordering a 4427,Chop off the knurled tail and bore it out hollow to take the stem. Low temp silver to solder it inside.It'll only take 1 hour or so
Nice small head. Fine tooth. Flex.Good handle(unlike the Snap)

 

[shockwave]

I like this one only 8 inch long too http://m.ebay.com/itm/JP-Hazet-1-2-short-ratchet-wrench-916K-/262244630657?nav=SEARCH

And a good mention is older 36 tooth snap on offer1/2 heads too you can swap out in there 3/8 line