Really Screwy stand

[royce]

Getting started
10" sch 40 OD
6" sch 40 ID
1 in 40 pitch
Blind flange center for the base.
I'll cut the top and bottom plates from 3/16" or 1/4" plate

 

[Bighead38]

This is gonna be awesome.

 

[Shootinok]

 

[Strouty]

I can't STAND it anymore!

 

[1wook]

How did you layout your cuts in the pipe?

 

[ilovevocs]

I'm always amazed at your ability to creatively use materials. Nice work.

 

[LXCam]

I always knew you were twisted.

 

[The Tool Tyrant]

Very 'Artsy-Fartsy' but I like it. I believe you're a little twisted royce.

Hey LX...looks like us So-Cal guys think alike...at the same time!

 

[LXCam]

Very 'Artsy-Fartsy' but I like it. I believe you're a little twisted royce.

Hey LX...looks like us So-Cal guys think alike...at the same time!

That's funny.

 

[3baygarage]

This is gonna turn out well.

Awesome stuff as always.

 

[Strouty]

Royce, you need to make some videos. This is kind of like **** for us, pictures just aren't the same.

 

[royce]

How did you layout your cuts in the pipe?

I marked quarters on the circumferance pipe, then marked out 1/4 quarter of the pitch at each 1/4 point, then connected the dots with a wraparound.
I hope that makes sense.

Royce

 

[royce]

I can't STAND it anymore!

No kidding

Royce

 

[royce]

I always knew you were twisted.

I wonder about that regularly!

Royce

 

[royce]

Lots of kind words
Thanks
Bighead
Shoot
Ilovevocs
TTT
3bay
And all

Royce

 

[royce]

Royce, you need to make some videos. This is kind of like **** for us, pictures just aren't the same.

Sorry Strouty
I don't have the time, skill or patience for that.

Royce

 

[CGT80]

This is gonna turn out well.

Awesome stuff as always.

Pun intended?

Even if you screwed up on it, people would just think it was part of the design.....or does it screw down?

Cool project

I wish I was more creative like that.

 

[NASTYZEN]

Royce damit! How do you even find the time to make artsy stuff all the time..
Havn't you started snow removing yet on top of re-modeling n fixing stuff you knock over??

He he, looks awesome.

 

[dr_clyde]

That looks cool. Any plans for what it will hold? If it was mine, I'd think about putting my Beverly shear on it or something else fairly non standard.

 

[gahrajmahal]

It's not just the creativity of all of your projects, but the fit and finish is so good too.

 

[royce]

Pun intended?

Even if you screwed up on it, people would just think it was part of the design.....or does it screw down?

Cool project

I wish I was more creative like that.

Thanks CGT,
Funny you mentioned screwing up or down, because I cut the top and bottom flights today and formed the top one backwards.
The dumbest part was I was right in front of it.
I really need to watch me closer.

Royce

 

[royce]

Royce damit! How do you even find the time to make artsy stuff all the time..
Havn't you started snow removing yet on top of re-modeling n fixing stuff you knock over??

He he, looks awesome.

Come now Nasty,
You ask that question like I am a responsible man.
When in reality, I'm like a child that does what is fun not what they should!!!
Thanks much

Royce

 

[steel 35]

Thanks for that picture

 

[royce]

That looks cool. Any plans for what it will hold? If it was mine, I'd think about putting my Beverly shear on it or something else fairly non standard.

Thanks dr,
I have not locked in what will mount on this, wish I had a beverly shear, that would be sharp looking, on this stand.

Royce

 

[royce]

It's not just the creativity of all of your projects, but the fit and finish is so good too.

Thank you Sir,
After forming the flight backwards, then straightening and reforming, I got it fit up and tacked off.
I was not sure it would fit for awhile, but finally whipped it into submission.

Royce

 

[royce]

Thanks for that picture

You Betcha

Royce

 

[steel 35]

That is a Very nice way to show some crazy skills.............

 

[dkroth]

Holy fucken ****.




.

 

[iajonesy]

They must give away welding supplies in Ak. Your builds and your imagination are second to none. Keep up the great fab jobs with pics.

Mike

 

[rmack898]

That is way cool and I agree that a Beverly should occupy the top of it.

 

[royce]

Formed, fit and welded the bottom flight today.
Also got it dressed and welded to the base.
I set a round top plate on it to check it out, have not welded it yet.
Now thinking about paint color.
Thanks to all for the compliments.

Royce

 

[Strouty]

Looks great!

 

[shedfullatools]

Amazing work Definitely an inspiration I will never live up too

 

[RivennHewn]

Creative in concept, complex in design, killer in execution.

 

[royce]

Headed to town this morning to fulfill some obligations, ran into freezing rain and had to come home.
So, I slopped some primer on.
Thanks all



Royce

 

[Shootinok]

Wow !




Sent from my iPhone using Tapatalk

 

[bczygan]

 

[PelicanPines]

If you were going for straight... Its a fail.

But hell that... Is Nifty... Freaking Nifty... Award winning Nifty... Spiffy Nifty.

 

[royce]

Thanks all

Pelican, spiffy nifty is a new high mark, but I got to say I'm crushed that Mom lied to me about being a special snowflake.

Anyhow, I found a old can of gloss grey enamel and was not sure the gold pinstripe paint I have would work with it so I made a test panel.
It looks good to my eye.
Now need to wait for the enamel to dry.

Royce

 

[Benw455]

That's sweet!!!!