Recommendation for angled feeler gauges

[The Critic]

Hey folks,

I need to do a valve adjustment on a Honda 2.4L and I am looking for some angled/offset feeler gauges. Would prefer longer ones.

Any recs?

http://www.amazon.com/dp/B0009OR94M/?tag=atomicindus08-20

Thanks!

 

[Sam'sAutoParts]

I have a set if the craftsman valve tappet gauges, and I have been happy with them. Some of the cheaper sets don't have all the sizes I needed for my 1.6L

 

[brtsvg]

Get a metric set if you are working on Japanese stuff - its much easier

 

[Sam'sAutoParts]

I think my craftsmen had both SAE and metric on each blade

 

[RedneckWelder]

I brought the $10 set at Craftsman. Still made in the USA. I THINK they had metric too, mine are SAE.

 

[Bross956]

I use the Lang tappered feeler gauges on my Honda K24. The handle that comes with the gauges is perfect for moving each gauge around the injector rail in front. Is this your first time adjusting them? Keep in mind when you tighten up the valve nut the adjuster screw some times moves down throwing off your adjustment. eBay has the set for $18 made in use

 

[Fedwrench]

http://www.tooltopia.com/kastar-hand-tools-3085.aspx

This is your best bet. You can preload the two blades you need and the handle is excellent for moving the blade needed. It's much better than trying peel out a blade from a stack and then peel out a different blade and alternate. Although I did it that way for a number of years because I was too cheap to get the snap on set.

 

[The Critic]

http://www.tooltopia.com/kastar-hand-tools-3085.aspx

This is your best bet. You can preload the two blades you need and the handle is excellent for moving the blade needed. It's much better than trying peel out a blade from a stack and then peel out a different blade and alternate. Although I did it that way for a number of years because I was too cheap to get the snap on set.

Great find -- thanks!

 

[Dust Devil]

get some straight ones and bend them to your spec. I have at least 5 sets all bent up and always one straight set.