signcrafter
Well-known member
- Joined
- May 9, 2012
- Messages
- 12,318
Today I had to pull some relays and they were a pain in the ****. I've had a relay pliers on my wish list for a while now but haven't pulled the trigger since it's not something I would use much. But after today they are going on the next tool purchase!
Looks like there are two styles, ones that grab under the relay and ones that grab the corners of the relay.
The lisle ones here grab in the slots or under the relay, http://www.amazon.com/dp/B002NR2Z56/?tag=atomicindus08-20
Here's the OTC ones that grab the corners of the relays, http://www.amazon.com/dp/B000IHM224/?tag=atomicindus08-20.
Is one style better then the other? Does one style fit in between the relays better then the other? Some of the relay boxes can be tight.
Looks like there are two styles, ones that grab under the relay and ones that grab the corners of the relay.
The lisle ones here grab in the slots or under the relay, http://www.amazon.com/dp/B002NR2Z56/?tag=atomicindus08-20
Here's the OTC ones that grab the corners of the relays, http://www.amazon.com/dp/B000IHM224/?tag=atomicindus08-20.
Is one style better then the other? Does one style fit in between the relays better then the other? Some of the relay boxes can be tight.