To avoid these ads, REGISTER NOW!

Retaining Wall Advice

BurtEggley

Well-known member
Joined
Oct 8, 2024
Messages
896
do take a look at codes as to height. Above a certain height, a rail is needed. That is also why some people break walls up into multiple ones of lower height. One reason that walls move, is that there is not enough footing, so be sure to have good footings poured, or excavated depending on wall type.
 
To avoid these ads, REGISTER NOW!
OP
R

rockcrawler

Well-known member
Joined
Jan 11, 2013
Messages
947
Location
Dallas, TX
Just a question: From the pictures you posted it's on the back of the house and you can't see it, so what's with all of the decretive work? I can see a decretive capstone but why the face?


It is on the side of the house that faces our next door neighbor. And some of it can be seen from the street as well. When I say decorative, I just don't want plain smooth looking blocks like cinder blocks. I'm just talking about something similar to what Drivesitfar used, just not curved.
 
To avoid these ads, REGISTER NOW!
OP
R

rockcrawler

Well-known member
Joined
Jan 11, 2013
Messages
947
Location
Dallas, TX
do take a look at codes as to height. Above a certain height, a rail is needed. That is also why some people break walls up into multiple ones of lower height. One reason that walls move, is that there is not enough footing, so be sure to have good footings poured, or excavated depending on wall type.

The max wall height will be about three feet. And, we live outside the city limits in an unincorporated area. There are no codes.
 
To avoid these ads, REGISTER NOW!
Top Bottom