Reversible 3/8" Drive Driver With a Clutch?

[dr_clyde]

I am looking for a cordless impact/driver/screwgun that has a 3/8" drive anvil, but also has a clutch. I would strongly prefer the paddle style reversing trigger, but would accept the standard trigger with reverse switch.

I make a part that is held in the fixture with a 5/8" bolt, but needs to be held at a very low torque or the part will distort.

Snap-on makes exactly what I want but with the 1/4" hex chuck. I would prefer to skip the adapter and go directly to the 15/16" socket off a 3/8" drive anvil if possible.

Snap-on Store

shop.snapon.com

Does anyone make what I'm looking for or am I stuck with the adapter setup?

 

[Kscardsfan]

Imagine you could butcher together a few pieces of different Milwaukee drivers to end up with what you want, but I can't think of anything off hand that meets your requirements.

 

[mdrawde]

Fein makes a drill that has includes a 1/2" anvil attachment. Or you could look at production tools from Bosch, Makita, or Panasonic.

 

[jar944]

Looks like an installation drill (in the world of carpentry) but like the snap on, they are all 1/4" hex.

 

[Nobody-named-Olli]

Festool has a 3/8 FastFix attachment that will work with all of the FastFix compatible drill/drivers from their line-up.

Festool Adapter AD-3/8" FF online

www.festool.com

It simply replaces the keyless or quick-change Centrotec chuck on the drill/driver.

There is also a Centrotec -> 3/8” adaptor. https://www.festool.com/accessory/d...s-and-adapters/495133---38--70-cekg-centrotec

That will work with every drill/driver that has the Centrotec chuck.

Kind regards,
Olli