Right Place, Right Time

[twertsy]

So at 0530 this morning I'm browsing CL for the usual cool old stuff. Run across this stack, Matco roll cab, SO middle and SO chest, the guy is asking $500. Top of the mark for me but I figured I'd send him a text and see what's up. Only about a 7 or 8 mile drive so he answers my test and I go over. I started looking at the box, which has been very well used, and it's full of tools, which he says go with the boxes. I offer $300 and he said sold.........if I hadn't bought it, it was going to be donated! It'll take me the better part of the day to get her cleaned out and post pics. Let me start by saying, I WANT a Blackhawk 4 ton jack complete, with fenders, light, etc., so if anyone is willing to trade one, much of this stuff can be yours. I'll start off with the box and sockets. None of the wrenches in the pics are from the box, they'll come later. I'm still emptying the box so I'll likely find the missing sockets in the sets. The box is incredibly scattered!

**SAE/Metric regular shallow, deep, mid and wobble (mid/shallow), MATCO and Snap-on impact sets.
**MATCO 3/8 hex set
** Snap on 3/8 hex and torx sets
** Snap on 3/8 crows foot set
** Snap on 3/8 deep and regular socket sets
** Snap on 3/8 deep and regular wobble socket sets
** 22 Snap on extensions total.
And a bunch of incomplete/spare sockets. More to come throughout the day.

 

[Outlawmws]

Well Don''t you just **** big time today!

How wide is the roller? looks more that just 28-29"

 

[woody 73]

That is what I call a hell of a good deal.

 

[twertsy]

**2 more sets of Snap-on impact wobbles. 1 3/8 drive SAE and 1 1/2" drive SAE.
**Snap On SN24B 1/2" breaker
**Snap On S711A 1/2" drive flex head rat
**Snap On F715 3/8" drive flex head rat
**Snap On S715 1/2" drive long handle rat
**Snap On F726B 3/8" drive rat
**2 1/2" drive and 1 1/4" drive Cman -v- rats
**Snap On F50CS 3/8" drive handle.

 

[LXCam]

That's a holy you **** batman. What a snag

 

[MoparTrucks]

That would have been a pretty good deal for 500 bones let alone 300...the suckage is strong, congrats!

 

[twertsy]

**Snap-On CJ125-6 Slide hammer/puller
**MATCO SP80 Slide hammer
**Snap-On S8695B 1/2" 4 lug axle nut socket
**Snap-On S6109A 1/2" impact 6 lug axle nut socket for Dana 70
**KD 3195 F250/350 Spindle nut socket
**Blue Point ANS 1921A 59mm 3/4" Drive 6 Point Wheel Bearing Socket
**MATCO AN 1904 2 9/16" Shallow 3/4" Drive Wheel Bearing Socket
**Snap-On S6302A 3/4" Dr. Chrysler/dodge Impact Ball Joint Socket
**Snap-On S9479A 3/4" Dr. Ball Joint Socket
**Snap-On S9365B 3/4" Dr. medium ball joint socket - Chrystler
**Snap-On WA14A Outer Tie Rod Socket
**Snap-On WA171D Chrysler Ford Caster Camber Hook

 

[twertsy]

Bunches of wrenches, all Snap-On save for just a couple matco/mac.

 

[zkling]

Well Don''t you just **** big time today!

How wide is the roller? looks more that just 28-29"

33"x18" mb920

 

[twertsy]

Tons of pneumatic / test tools.

 

[twertsy]

33"x18" mb920

Thanks ZK, and you're correct.

 

[LXCam]

Holy **** your suckage is gaining velocity with each passing minute ya rat bastage

 

[Old_Buick]

nicely done!

 

[twertsy]

Alright boys, gonna head to lunch..............probably a liquid lunch, before continuing the inventory.

 

[---]

That's a great find! Congrats!

 

[zkling]

Thanks ZK, and you're correct.

What is the top box? Kra58 or kra56? Looks to small to be a 59. Good deal after I saw the air tools. Even though I'm not a fan of twin pull boxes.

 

[kunkernator]

Wow, I could never find a deal like that in my area.

Congrats, you ****!

 

[twertsy]

Not sure ZK. This guy was a "tool slob!". Didn't take care of anything so the air tools may or may not b good.

 

[zkling]

Not sure ZK. This guy was a "tool slob!". Didn't take care of anything so the air tools may or may not b good.

Yea I hear you on that, hence I'm very leery of buying old air tools that I can't try first. Only 2nd to cordless tools. Any ratchets?

 

[twertsy]

Yeah, they're up above.

 

[ddawg16]

"You ****"

and in case you didn't get the memo....you REALLY ****

 

[neuralsnafu]

You ****

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[twertsy]

And the last pieces. There's more stuff but this is pretty much the end of the good stuff.

**Snap-On Angle wrenches and ratchet wrenches
**Matco screwdrivers, SO pry bars, SO Ladysfoot set, etc.
**Snap-On line wrenches and Mac Screwdriver set (missing one small)
**More SO prybars, etc.
**Snap-On puller set
**Other Snap-On and OTC pullers, SO Hub adapter, etc.

 

[twertsy]

Here's the last of the good stuff from that box. Big pile of Peterson vise grips, SO awl set, tons of different pliers and a bunch of SO brake tools.

 

[zkling]

Wow have any pics of the top box open?

 

[gnpenning]

CAn't believe know one has tried to save from from all this work sorting it all out and offered you the $500 he was originally asking for it all so I will.

Did anyone mention you ****...

Good job

 

[Lassen Forge]

Damned ****-istani's...

Well well done.

Now if you'll excuse me I need to go punch some holes in a wall or something...

 

[bluebolt]

What's the brand and part number on that bearing separator?

Oh and yes YOU ****!!!!!

 

[2oolhound]

Alright boys, gonna head to lunch..............probably a liquid lunch, before continuing the inventory.

Wha…? You're going to torture us with more????

You know what they say, the early bird gets the YOU ****!!!!

 

[66354dream]

Congrats but,,,,,, you ****!!!

 

[jeffmoss26]

Damn! You ****!

 

[PFSard]

You are making me sick to my stomach. U ****. Unbelievable score.

 

[toolman9w]

Nice score twertsy! Very jealous.

 

[organ]

I was pulled into this thread via the vacuum it created...

 

[twertsy]

Wow have any pics of the top box open?

I will try and get that for you tomorrow ZK, but more likely Thursday.

CAn't believe know one has tried to save from from all this work sorting it all out and offered you the $500 he was originally asking for it all so I will.

Did anyone mention you ****...

Good job

Hmmm, nah, I think I'll pass on that one.

What's the brand and part number on that bearing separator?

Oh and yes YOU ****!!!!!

I'll have to look at it thursday.


Like the thread title connotes, this was just a case of being in the right place at the right time. Appreciate the YSage

 

[Bagherra]

"The suckage is strong in this one"...(in Yoda voice)...

CONGRATS!!!

Gonna PM you my address , i'll be more than happy to take some of that off your hands!

 

[twertsy]

"The suckage is strong in this one"...(in Yoda voice)...

CONGRATS!!!

Gonna PM you my address , i'll be more than happy to take some of that off your hands!

A Saint in the boondocks perhaps?

 

[Indexmill]

Stop now! Please stop.

 

[MrWrencher823]

**2 more sets of Snap-on impact wobbles. 1 3/8 drive SAE and 1 1/2" drive SAE.
**Snap On SN24B 1/2" breaker
**Snap On S711A 1/2" drive flex head rat
**Snap On F715 3/8" drive flex head rat
**Snap On S715 1/2" drive long handle rat
**Snap On F726B 3/8" drive rat
**2 1/2" drive and 1 1/4" drive Cman -v- rats
**Snap On F50CS 3/8" drive handle.

those hard handle ratchets for sale by chance? just kicking tires.

 

[248superduty]

Wow this is awesome!!!