Rotary Bridge Jack compatibility with BendPak

[SkeetShooter]

Hi all, first post here. I've lurked for a while checking out garage build threads and also got my ideas and suggestions by searching this forum when I ended up buying my Bendpack HD-7W 4 post lift.

I have an opportunity to get some used, but apparently in good shape Rotary 7000 lb rolling bridge jacks for a good price. I have been scouring the interwebs looking for some measurements and have come up with bupkis. What I would like to know is the following.

Anyone here have a Rotary 4-post lift?
- If so, can you measure your channel width, where the bridge jack's rolling assembly would sit?

- If anyone has Rotary Bridge Jack's can you let me know if there is any over-hang in the assembly or any limiting factors for what would not allow me to use this on my BendPak.

They look incredibly similar, but before i drive a few hours and spend some coin, I'd like to know more about this.

Thanks.https://scontent-iad3-1.**.fbcdn.net/v/t1.0-9/46468575_10102315978542619_5438080014425784320_n.jpg?_nc_cat=101&_nc_ht=scontent-iad3-1.**&oh=f96f8c0dfc4f5a96d4d92e43955340e7&oe=5CB25AE5

 

[SkeetShooter]

Moderators, Please close or delete the thread. I got the answer from one of the forum members via PM.

 

[19Vert64]

If you shared your answer it may help out a member in the future with the same question


Sent from my iPhone using Tapatalk

 

[WaterBoyz]

Hi all, first post here. I've lurked for a while checking out garage build threads and also got my ideas and suggestions by searching this forum when I ended up buying my Bendpack HD-7W 4 post lift.


Moderators, Please close or delete the thread. I got the answer from one of the forum members via PM.

One of the many uses of this and other forums is to help other people.

The amount of stuff I've learned here would take me many lifetimes to learn by myself.

It does PMoff when a poster never comes back to give some form of solution to their situation.

I just got a 4-post and will be looking for possible options to a bridge jack other than the OEM's unit. I'm sure I am not the first person to look at this and probably it has been looked at by many people before me. Those people could have posted an answer and could have saved me time and/or money.

.......for the moment.

 

[SkeetShooter]

OK Sorry. So the answer is NO. A rotary RBJ will not work in a BendPak lift.

 

[pbon]

One guy bought a Greg Smith rbj and it did not work on the bendpak. A fabricator could fix that but most of us are looking for an off the shelf solution. I spent the big bucks on the bendpak rbj. If you find another brand that fits let us know.