To avoid these ads, REGISTER NOW!

Rust Bullet Clear Shot Results

Joined
Jun 29, 2015
Messages
8
Basically I applied the Rust Bullet Clear Shot:
http://www.rustbullet.com/products/topcoats/clear-shot.html

...which is typically the clear coat used over the normal colored standard formula beneath it, all by itself.

Pictures are attached. The video will take me a couple weeks to edit but is also forthcoming. Garage is 350 sq. ft. and I applied 3 coats, which used ~2.5 gallons. All in all it was pretty easy to apply and seems to hold very well. The only thing that tripped me up a little was the coverage on the 2nd coat with the anti-skid. For some reason instead of an even sandpaper-like finish, in a few spots it looked like how water droplets on a windshield just as it starts raining. Not sure how else to describe it, or what caused it, but not a huge deal.
Coatings were applied in 95-102F temperature and ~40-50% humidity most days, for reference.

The coating seems pretty tough and like a good alternative if you don't care for a matte, colored floor. Just check out the pictures to see if the color suits you.
 

Attachments

  • BEFORE1.jpg
    BEFORE1.jpg
    73.1 KB · Views: 194
  • AFTER1.jpg
    AFTER1.jpg
    138 KB · Views: 218
  • AFTER2.jpg
    AFTER2.jpg
    153.3 KB · Views: 204
  • TEXTURE.jpg
    TEXTURE.jpg
    139 KB · Views: 226
Last edited:
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom