To avoid these ads, REGISTER NOW!

Rust bullet question.

easlers

Well-known member
Joined
Aug 24, 2016
Messages
50
I placed my order with garageflooring llc. I should recive materials this friday.
I did my time on a grinder on a section of it that old diy epoxy was put on . Now in addition to that I have about 30' x 30' of newley poured concrete. Poured it in january so I know it cured. Well today I started cleaning out the rest of the area and moving stuff out so as to have the area clean. In doing so I was using the forks on my tractor and after its all cleared out I swept it twice then air hosed it and vaccummed it. I noticed that I now have tire marks on the crete. So if your out there
Justin in the order I got it had some spot rust remover. Will this take off the tire tracks? If not what would you recomend? Please help.
 
To avoid these ads, REGISTER NOW!

Garage Flooring

ALLIANCE MEMBER
Joined
May 21, 2011
Messages
5,288
Location
Grand Junction, CO
The safest way is to use an angle grinder or sander and abrade it off. You can use the metal blast or goof-off etc, but then you need to thoroughly rinse and allow to dry.
 
To avoid these ads, REGISTER NOW!
Top Bottom