Rust cleaning laser

[SRX]

Website may be a scam, but, I want one.

https://thegdtime.com/products/100w...19cFfRzTctrnuTEv8RbUuQ0ej9Avq5clrdByNtQ5m5wI4


Video seems legit.

 

[Stuart in MN]

There are posts here about laser rust removal every six months or so, it seems. The machines do work, but they are pretty expensive.

 

[Aerospace Eng]

$500K for ones that actually work well

 

[SRX]

There are posts here about laser rust removal every six months or so, it seems. The machines do work, but they are pretty expensive.

I figured as much. Did a quick site search for "laser", but didn't find anything quickly.

 

[Chucktin]

I've always wondered just what they were threatening Bond with in Goldfinger.

 

[ZRX61]

$500K for ones that actually work well

& apparently not approved by the FAA for paint/corrosion removal on aircraft... even though the AF uses one at Travis to strip C17's...

 

[tomwil]

Website may be a scam, but, I want one.

https://thegdtime.com/products/100w...19cFfRzTctrnuTEv8RbUuQ0ej9Avq5clrdByNtQ5m5wI4


Video seems legit.

Like how the item linked is 100W, whereas the YouTube video is 10X stronger at 1000W.

 

[laserchina]

Website may be a scam, but, I want one.

https://thegdtime.com/products/100w...19cFfRzTctrnuTEv8RbUuQ0ej9Avq5clrdByNtQ5m5wI4


Video seems legit.

I figured as much. Did a quick site search for "laser", but didn't find anything quickly.

High quality resistor cutting machine <a href="https://www.laserchina.com/resistor-trimmer/">High quality resistor cutting machine</a> is another type for the scenario you mentioned. https://www.laserchina.com/resistor-trimmer/

 

[kf4zht]

I got a fiber laser for marking/engraving a month or so ago. When I was playing around with it at one point I put some dykes with slight surface rust under it to see what would happen. It was able to blast away the rust and while it wasnt back to shiny steel it was clean. Now it would be very size limited for my machine and require reorienting the part to be in focus a few times, but I'm going to keep it in my bag of tricks if I need to derust a small and sensitive part.

 

[JradM]

I want one too. I don't care if it's small and slow - well, I do, but I would buy a small and slow one if it were available at a price I could afford.

Even if it only does a 1x1 cm square - I'll take my time! Just give me a laser already.