Sevillian
Active member
My Saber cabinets finally arrived after nearly 12 weeks, and I've got a couple of questions that don't seem to be addressed in the previous install threads I've been reading through:
1. What is a good distance between the workbench and the bottoms of uppers that are going above a workbench? I'm thinking a minimum of 18" for "project clearance" although up to 24" might be nice as long as I can reach at least the lower shelves. I'm okay with putting some infrequently used stuff on the upper shelves that would need a small folding step stool for access
2. The wall mounting screws for the cabinets seem pretty small/light duty. I'ver seen references to people replacing them with larger lag screws. Are most of you doing this, or is it only for those who insist on overkill?
1. What is a good distance between the workbench and the bottoms of uppers that are going above a workbench? I'm thinking a minimum of 18" for "project clearance" although up to 24" might be nice as long as I can reach at least the lower shelves. I'm okay with putting some infrequently used stuff on the upper shelves that would need a small folding step stool for access
2. The wall mounting screws for the cabinets seem pretty small/light duty. I'ver seen references to people replacing them with larger lag screws. Are most of you doing this, or is it only for those who insist on overkill?