To avoid these ads, REGISTER NOW!

Scary Compressor

Steevo

Well-known member
Joined
Aug 18, 2009
Messages
8,738
Location
43.49600, -112.04300
This bizarre beast showed up on C/L:

i-wV6JScd-M.jpg


i-7WjSr4R-M.jpg


It has a decent looking IR pump on it, that may be worth the $200 he wants for the whole thing, and the motor may be good, but the tank is scary as hell and the trailer and tank need to be scrapped.
 
To avoid these ads, REGISTER NOW!

Ed P2

Member
Joined
Mar 14, 2013
Messages
5
What is that tank from?

Nightmare on Elm Street!

Look at the good side. When driving home with it, if you accidently drive off the road into some water, it will probably float, trailer and all!

Ed P2
 

AndyA

Well-known member
Joined
May 23, 2011
Messages
514
Location
Texas Near Dallas
Nightmare on Elm Street!

Look at the good side. When driving home with it, if you accidently drive off the road into some water, it will probably float, trailer and all!

Ed P2

Yeah, but will it float pump side up, or pump side down? Looks like that pump has more metal in it than the trailer.
 

Kevin C

Well-known member
Joined
Aug 4, 2011
Messages
1,653
Location
Portland OR
The tank looks like it washed up from Japan or was lost from a fishing trawler! By the quality of the construction, I doubt its a home built. The attention to detail on the OHSA approved belt guard is a giveaway. :)
 
To avoid these ads, REGISTER NOW!

plow

Well-known member
Joined
Feb 12, 2013
Messages
1,024
Location
Louisiana
I have the means to hydro test it.

If it were me, I would test it and run it as a sand blast compressor depending on how long it took to fill up.
 

jwith68

Well-known member
Joined
Jan 10, 2006
Messages
1,639
Location
EC Missouri
Looks fine to me. What could possibly go wrong?



i5Td3G9VXAaof.gif


(credits to Jim Von Baden in the "Thread of Awesome")
 

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
That tank :shocking: :shocking: :shocking:

It's not even shaped like a proprer pressure vessel . . . It's got FLAT ends and looks like seam weld across belly . . . . RUN, RUN, RUN !!!

+1 for Steevo to save that pump & motor and scrap the rest.
 
To avoid these ads, REGISTER NOW!
Top Bottom