To avoid these ads, REGISTER NOW!

Screwdriver Sets - 4 Slot/2Ph Combo

mobiledynamics

Well-known member
Joined
Mar 14, 2010
Messages
5,075
Location
Gotham City
How did the screwdriver set of 4 slotted/2 Ph come about...


IMO, they could probably replace 2 slotted.....add a PH3 and a longer cab tip slotted.
 
To avoid these ads, REGISTER NOW!

gungatim

Well-known member
Joined
Jan 8, 2013
Messages
8,101
Location
west mich
or substitute the slotted with a butterknife. then add a few torx to make up the difference.
 
To avoid these ads, REGISTER NOW!

four.cycle

Well-known member
Joined
Oct 19, 2015
Messages
29,774
Location
Tacoma, Washington
^ they don't put oil in cans anymore.

... and on that note....

Every time that comes up, I always wonder what happened to the millions and millions of "oil pour spouts" that were required to get the oil out of the can and into the engine? Where did they all go?
We sold thousands and thousands and thousands of them - anywhere from .69 cents up to $6.99 in every brand imaginable. If we were shy of minimum order for prepaid freight, we'd just pad the order with oil spouts because damn near everybody had them and we knew they'd sell.
And it didn't matter if you paid .69 or $6.99 for them, the damn things always leaked - didn't matter what brand or where they were made - they were all ****.
So... where are they now? Where is the oil spout graveyard?

oil spout.jpg
 

66HertzClone

ALLIANCE MEMBER
Joined
Dec 6, 2006
Messages
4,078
Location
Long Valley, NJ
Yeah, I can recall crushing the side of an oil can or two trying to get one of those in place. Vavoline #141 10w40 was the prime candidate.
 

Moparman390

Well-known member
Joined
Jan 15, 2016
Messages
437
I'm sure people just tossed 'em, some scrapped 'em, and there's lots still hanging around in corners of messy garages.
 

gungatim

Well-known member
Joined
Jan 8, 2013
Messages
8,101
Location
west mich
I've probably got 6 of them...few on the wall, some stuck in some box somewhere...

and I know oil doesn't come in cans anymore unless you buy old stock at yard sales.

you punch a small hole in the bottom with a Phillips and heel of your hand so you don't mess up the label. use the oil. display the can. no leaky cans on the shelf...

plus I can always find a Phillips in the junk drawer. can't say the same for a can opener when I want my morning tomato juice...or a ****** mary...(or ****** shiner as I call them since I use the 'shine instead of vodka usually)...
 
To avoid these ads, REGISTER NOW!
Top Bottom