trackwelder
Well-known member
Anyone know of a sds max to 1/2” chuck adapter. I’m looking to run an ice auger with a m18 2717-20 rotary drill.
Sds max to 1/2” drill chuck adapter
- Thread starter trackwelder
- Start date
metaldad
Well-known member
Dont know the p/n, but i have one for my bosch. Ill see iffen theres an id on it when I get home
mike93lx
ALLIANCE MEMBER
Instead of a chuck, how about something like this? Much simpler and cheaper
Garden Auger Power Drill Adapter fits Corded Drill and Cordless Drill, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver https://www.amazon.com/dp/B07XY1LDQG/?tag=atomicindus08-20
Garden Auger Power Drill Adapter fits Corded Drill and Cordless Drill, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver https://www.amazon.com/dp/B07XY1LDQG/?tag=atomicindus08-20
OP
trackwelder
Well-known member
That won’t work with the Milwaukee rotary drill I have. Needs to be a sds max
Handyandy23
Well-known member
This would cost more and get bulky, but there are tons of readily-available SDS Max to SDS Plus adapters, and Bosch makes those SDS Plus to 1/2" chuck adapters. Buy one of each and stick two adapters together to get what you're looking for.
mike93lx
ALLIANCE MEMBER
It was an example
sparky 1971
Well-known member
Like this?
You could also use a SDS Max to SDS+ adapter, then SDS+ to 1/2" chuck if the above item won't work.
www.zoro.com
SDS Max Chuck Driver, 1/2 In., Keyless: Masonry Drill Bits: Amazon.com: Tools & Home Improvement
SDS Max Chuck Driver, 1/2 In., Keyless: Masonry Drill Bits: Amazon.com: Tools & Home Improvement
www.amazon.com
You could also use a SDS Max to SDS+ adapter, then SDS+ to 1/2" chuck if the above item won't work.
Bosch SDS Max To SDS Plus Adapter HA1030 | Zoro
Order Bosch SDS Max To SDS Plus Adapter, HA1030 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for an account.
www.zoro.com
Bosch SDS Max Shaft Adapter 1/2" Drill Chuck | eBay
Find many great new & used options and get the best deals for Bosch SDS Max Shaft Adapter 1/2" Drill Chuck at the best online prices at eBay! Free shipping for many products!
www.ebay.com
I remember seeing something like these back then for $50...
or something like these if you have a spare well used sds max tool that you can spare and happens to be 1/2" diameter.
maybe get an SDS max bit welded to the ice auger? or get a coupling of some sort made up
a sacrificial SDS bit would probably be less expensive and less bulky
a sacrificial SDS bit would probably be less expensive and less bulky
Renegade1LI
Well-known member
I have a bunch of brand new ones, it's a great idea but not worth the effort, every crew wants them & never uses them. Most sds or sds max are too bulky & heavier for regular drilling & usually you have a drill handy with a bit chucked in it. It's just not practical, in my opinion.
OP
trackwelder
Well-known member
I would like to leave the ice drill stock. Plus there are times when an extension is need due to ice thickness. I have a 1/2” fuel Milwaukee that work well, just can’t find the damn handle for it. Would like to have the ability to use both drills if needed.
OP
trackwelder
Well-known member
Would you have a part number, brand for them?
tyyost
Well-known member
Bosch HA1032 is the SDs max to drill adapter, you still need a Chuck. Or go to eBay and spend $65.
Renegade1LI
Well-known member
Sure, it’s a jacobs 1/2” model 33BA 1/2-20, i do like them with the cordless hammer drill, it’s very compact. It comes as a kit, Milwaukee sds adapter in stock at Home Depot.
Milwaukee SDS/Chuck Adapter Kit 48-66-1370 - The Home Depot
Visit the Home Depot to buy Milwaukee SDS/Chuck Adapter Kit 48-66-1370
www.homedepot.com
Attachments
Last edited:
OP
trackwelder
Well-known member
Thanks guys for all the help!!!!
LabradorLife1975
New member
I have a 20V dewalt hammer drill and want to change the chuck, need an adapter that will fit the chuck that is on the drill now, did you find something, my drill has the bits that have to twist and push in and the piece that releases them be’s pushed inwards, so looking for a chuck that will fit this and hold the 1/2 “ molded piece thats made unto my ice auger
KnurledNut
Well-known member
I made one for my SDS+ many years ago.
If I can find pics, ill post them.
If I can find pics, ill post them.
Last edited:
LabradorLife1975
New member
nice job, will this work with my ice auger, think the bit that’s fastened to the chuck will be strong enough and sufficient to hold for drilling holes through the toughest of ice conditions?
Just checking to see if you got a working solution, and if so, how did the rotary hammer work out on the ice?