Sears Dunlap Drill Press Restoration

[vertguy]

Parts list (as borrowed from JZiggy):
- 1-5/8 x 12 inch aluminum shaft (ebay)
- 5/8 OD x 1/2 in. ID flanged brass bearings (2ea) McMaster (used for the pulley)
- 1/2 in. ID Thrust Needle-Roller Bearing (2ea) McMaster
- 1/2 in. ID Thrust Needle-Roller Bearing washer (4ea) McMaster
- 1/2 in. ID locking collar (1ea) McMaster
- 1/2 in. OD x 6 in. hardened shaft, McMaster
- 4 Step Chicago pulley (Amazon)

 

[oilfield trash]

Is there an equivalent or modern alternative to the Fiber Washer PN# 26716 ?

 

[ABQ_Max]

Hey All, I just purchased a Very used Dunlap 103.23621 drill press from a picker for $50 bucks. While holding the chuck I can feel there a bit of slop. Can any one direct me to where I can download a operation and Part manual for this machine? I'm thinking i need to replace the Quil and Quil spindal bearings but have no part referance. Thanks

 

[mikegt4]

Vintage Machinery is a good place to find such things.

Here is the page that has photos of 103.23621 drill presses (and it predecessor the 23620). Follow the "description" column about 2/3 down the page.
http://vintagemachinery.org/mfgindex/detail.aspx?id=497&tab=4&sort=2&th=false&fl=

Here is the manual for the 103.23620.
http://vintagemachinery.org/pubs/detail.aspx?id=1787

BEWARE!!! Going through the Vintage Machinery Photo Index can become addictive.