BerninicaCO3
Well-known member
- Joined
- Jul 6, 2007
- Messages
- 164
- Location
- iowa
Hey!
I'm going back to college, and selling my tools from being a mechanic.
I've sold on this site before-- so I can find some references for you if trust is a factor. Last time I sold tools was this summer during a move, so the worst that can be said was that I was slow to ship some things.
Anyway, over the next couple days I'll be listing everything that I'm selling in this thread.
Feel free to email me at berninicaco3 at g-mail dot com, or, call/ text at four 1 zero, eight 0 2, nine 0 one 4, with any questions.
Picking up in person is always welcome. I'm pricing things shipped, assuming a flat rate priority mail box, so things like socket rails/ hanson trays that don't readily fit in a flat rate box, are not included. If you want to pay a bit more for shipping, I can include the organizer pictured. Also, if buying several things, I can probably combine shipping and give a break.
Oh! payment. Paypal is fine; I have an account through the email address above. Money order or check, mailed, is fine too-- if a check, give me time to make sure it's fully cleared before I ship it. If you know how to wire transfer into my bank account, go for it-- but I think that's expensive for you iirc (been a long time since I did a wire transfer)
-Bernard
Cornwell 12 point 1/2" drive impact sockets, set STI3114MS, missing the 12mm (I will include if I find it, however). I always used the 13mm for driveshaft bolts on my old fords-- they're 12pt and impacts were very useful. Specialty application though; best on 12pt bolts. None cracked. Retails for $185! Asking $85 shipped.
gearwrench 7pc metric ratcheting flex head set, 10-19mm (10,12,13,14,15,17,19)
http://www.sears.com/gearwrench-7-p...p-00944006000P?prdNo=6&blockNo=6&blockType=G6
I can still use these, so not going super cheap: going to ask $45 shipped.
Snapon torx socket set, retails for $165.50, asking $90 shipped
No cracks, breaks, chipped chrome (that I noticed). T40 was recently warrantied iirc.
FTX27E $27.50
FTX30E $27.50
FTX40E $27.50
FTX45E $27.50
FTX50E $27.50
FTX55E $28.00
Three cornwell ratchets: SR70 1/2" drve, retails for $125.97. SR50 1/2" drive, retails for $118.66. And JRF36, retails for $98.37. Asking $150 shipped for all 3 of them!
Bought a year ago from the MAC dealer. Never turned in warranty card. Only used a couple dozen times and oiled every time-- did a lot more electrical work than I never did mechanical at the dealer.
model AR175RP, $250 retail, asking $150 shipped.
http://www.mactools.com/product/tabid/120/p-324708-38-air-impact-ratchet.aspx
MAC 1/4" swivel extension set, brand new. Asking $60 shipped.
M14EW $36
M10EW $25
M6EW $22
M4EW $17.29
M2EW $14.99
Cornwell weatherhead socket set in tray. Asking $55 shipped.
EL214 7/16" $15.90
EL216 1/2" $15.75
EL218 9/16" $18.75
EL220 5/8" $19.92
EL222 11/16"$20.13
EL224 3/4" $21.22
EL227 27/32"$23.22
1/2" drive chrome sockets, 12 pt set: shallow and deep. Majority brand-new SK. Fair market value (not full retail) of over $390; asking $200 shipped for the entire set.
Shallow:
10mm craftsman 44232 $3.59
11mm S-K 40311 $7.34
12mm wright 41-12 $9.49
13mm blackhawk 43013M$4.56
14mm craftsman 44256 $3.99
15mm S-K 40315 $9.54
16mm wright 41-16 $10.89
17mm S-K 40317 $8.86
18mm S-K 40318 $6.61
19mm S-K 40319 $8.86
20mm wright 41-20 $12.59
21mm S-K 40321 $9.72
22mm wright 41-22 $10.99
23mm wright 41-23 $11.69
24mm MAC v6/24MMR (6pt) $19.59
25mm craftsman 44269 $4.94
26mm craftsman 44243 $6.29
Deep:
10mm S-K 48010 $14.19
11mm S-K 48011 $14.19
12mm S-K 48012 $14.19
13mm S-K 48013 $14.19
14mm S-K 48014 $14.19
15mm S-K 48015 $14.19
16mm S-K 48016 $14.19
17mm craftsman 44445
18mm S-K 48018 $14.19
19mm S-K 48019 $14.19
20mm S-K 48020 $15.29
21mm S-K 48021 $15.29
22mm S-K 48022 $15.29
23mm S-K 48023 $15.29
24mm S-K 48024 $15.29
25mm S-K 48025 $17.96
27mm S-K 48027 $17.96
MAC tools TG900 air gauge. retails for $62 off truck. Asking $35 shipped. 1.5yrs old, works fine.
I'm going back to college, and selling my tools from being a mechanic.
I've sold on this site before-- so I can find some references for you if trust is a factor. Last time I sold tools was this summer during a move, so the worst that can be said was that I was slow to ship some things.
Anyway, over the next couple days I'll be listing everything that I'm selling in this thread.
Feel free to email me at berninicaco3 at g-mail dot com, or, call/ text at four 1 zero, eight 0 2, nine 0 one 4, with any questions.
Picking up in person is always welcome. I'm pricing things shipped, assuming a flat rate priority mail box, so things like socket rails/ hanson trays that don't readily fit in a flat rate box, are not included. If you want to pay a bit more for shipping, I can include the organizer pictured. Also, if buying several things, I can probably combine shipping and give a break.
Oh! payment. Paypal is fine; I have an account through the email address above. Money order or check, mailed, is fine too-- if a check, give me time to make sure it's fully cleared before I ship it. If you know how to wire transfer into my bank account, go for it-- but I think that's expensive for you iirc (been a long time since I did a wire transfer)
-Bernard
Cornwell 12 point 1/2" drive impact sockets, set STI3114MS, missing the 12mm (I will include if I find it, however). I always used the 13mm for driveshaft bolts on my old fords-- they're 12pt and impacts were very useful. Specialty application though; best on 12pt bolts. None cracked. Retails for $185! Asking $85 shipped.
gearwrench 7pc metric ratcheting flex head set, 10-19mm (10,12,13,14,15,17,19)
http://www.sears.com/gearwrench-7-p...p-00944006000P?prdNo=6&blockNo=6&blockType=G6
I can still use these, so not going super cheap: going to ask $45 shipped.
Snapon torx socket set, retails for $165.50, asking $90 shipped
No cracks, breaks, chipped chrome (that I noticed). T40 was recently warrantied iirc.
FTX27E $27.50
FTX30E $27.50
FTX40E $27.50
FTX45E $27.50
FTX50E $27.50
FTX55E $28.00
Three cornwell ratchets: SR70 1/2" drve, retails for $125.97. SR50 1/2" drive, retails for $118.66. And JRF36, retails for $98.37. Asking $150 shipped for all 3 of them!
Bought a year ago from the MAC dealer. Never turned in warranty card. Only used a couple dozen times and oiled every time-- did a lot more electrical work than I never did mechanical at the dealer.
model AR175RP, $250 retail, asking $150 shipped.
http://www.mactools.com/product/tabid/120/p-324708-38-air-impact-ratchet.aspx
MAC 1/4" swivel extension set, brand new. Asking $60 shipped.
M14EW $36
M10EW $25
M6EW $22
M4EW $17.29
M2EW $14.99
Cornwell weatherhead socket set in tray. Asking $55 shipped.
EL214 7/16" $15.90
EL216 1/2" $15.75
EL218 9/16" $18.75
EL220 5/8" $19.92
EL222 11/16"$20.13
EL224 3/4" $21.22
EL227 27/32"$23.22
1/2" drive chrome sockets, 12 pt set: shallow and deep. Majority brand-new SK. Fair market value (not full retail) of over $390; asking $200 shipped for the entire set.
Shallow:
10mm craftsman 44232 $3.59
11mm S-K 40311 $7.34
12mm wright 41-12 $9.49
13mm blackhawk 43013M$4.56
14mm craftsman 44256 $3.99
15mm S-K 40315 $9.54
16mm wright 41-16 $10.89
17mm S-K 40317 $8.86
18mm S-K 40318 $6.61
19mm S-K 40319 $8.86
20mm wright 41-20 $12.59
21mm S-K 40321 $9.72
22mm wright 41-22 $10.99
23mm wright 41-23 $11.69
24mm MAC v6/24MMR (6pt) $19.59
25mm craftsman 44269 $4.94
26mm craftsman 44243 $6.29
Deep:
10mm S-K 48010 $14.19
11mm S-K 48011 $14.19
12mm S-K 48012 $14.19
13mm S-K 48013 $14.19
14mm S-K 48014 $14.19
15mm S-K 48015 $14.19
16mm S-K 48016 $14.19
17mm craftsman 44445
18mm S-K 48018 $14.19
19mm S-K 48019 $14.19
20mm S-K 48020 $15.29
21mm S-K 48021 $15.29
22mm S-K 48022 $15.29
23mm S-K 48023 $15.29
24mm S-K 48024 $15.29
25mm S-K 48025 $17.96
27mm S-K 48027 $17.96
MAC tools TG900 air gauge. retails for $62 off truck. Asking $35 shipped. 1.5yrs old, works fine.
Last edited: