Selling off Snap-On toolbox and contents

[back2class]

done thanks for buying

 

[bry@n]

I want first dibs on the Ratcheting screwdriver and the snap on ratchets.

 

[Deafautotech]

are you sell whole tools as in snap on box package? or you sell each tool that you show the pictures??

i has interesting on few snap on flex sockets and some of wrenches....

 

[eddyyy302]

Calling dibs on the red SO pick, Par-x wrenches, SO screwdrivers, Long needlenose pliers and SO ratchets behind bry@n, Pending prices.

Dan

 

[thk2c]

d@mn bry@n and eddyyy302 that was quick.......if you guys don't take the ratchets (the dual 80 i see) I am next in line pending prices

 

[the spyder]

Interested in SO 1/2" breaker bar, any swivel metric sockets, long needle nose, visegrips, fluke meter, and possible more.

 

[tonydanzah]

interested in these ratchets

dibs on the 2 yellow locking hose pliers

 

[Red Green]

Is the ratcheting adapter 1/2" drive?

 

[mikevango]

I am interested in the 6 inch and longer 3/8 extensions.

 

[kwhitelaw]

interested in a couple Snap on wrenches if you have the sizes..

18mm
19mm

oex28b
oex22b

also interested in any SSD screwdrivers you have, color and condition not important.

thanks!

kevin

 

[71Datsun510Wagon]

dibs removed to avoid confusion

 

[Johnnie]

I'm interested in one of the pneumatic impact guns. Do you know the specs for them or model numbers?

 

[AMP2]

I'll buy the 3/8" drive air ratchet and the Fluke meter.

 

[danc333]

Dibs on the 2 green stubby screwdrivers and the yellow hose clap pliers pending prices

 

[tonydanzah]

Dibs on the 2 green stubby screwdrivers and the yellow hose clap pliers pending prices

beat you to the hose clamps post #7

 

[street131]

Hey, how much do you want for that 1 1/4 wrench and the other 1 1/4 wrench? How much do you want for the 3/8 speeder? How about each of the offset wrenches on the 2nd picture down? Thankyou very much!!!

 

[94legaleagle]

The picture of the drawer w/ the pliers - I'd be interested in the 2 long needle nose pliers (right hand side back of drawer) and the two red handled pliers in the back LEFT of the same drawer (same divider) - also interested in the green Snap On ratcheting screwdriver -

I can't tell if you have these or not, but I need:

Snap On or Matco 1/2" drive 3/4 socket - 6 or 12 point - std depth

Snap On 18mm and 28mm 12 point 1/2" drive std depth sockets

let me know what you have and prices.

Thanks!

 

[dustin19]

dibs on ratcheting adapter, williams ratchet, breaker bar in first pic, bonney wrenches if no one else claimed them and the big snap on 17 mm 19mm box end from snapon if no one else claims it.... doubt ill get lucky though

 

[Garapeto]

wow can i get dibs on the 2 green snap-on stubbies if not all ready spoken for.

 

[dustin19]

Williams 3/8 60tooth ratchet NEW. I like it better than my dual 80's $16
17mmx19mm $7

 

[the spyder]

Dibs removed.

 

[back2class]

Williams 3/8 60tooth ratchet NEW. I like it better than my dual 80's $16
17mmx19mm $7

well, you are the first to say you want them after prices are posted. So you got them!

 

[dustin19]

well, you are the first to say you want them after prices are posted. So you got them!

pm me ur adress .

 

[kwhitelaw]

damn, doesnt look like you listed anything that I need/want..

is the 10mm SO wrench in pic 2 not available?

thanks

 

[back2class]

damn, doesnt look like you listed anything that I need/want..

is the 10mm SO wrench in pic 2 not available?

thanks

Nothing?
Good eye! Yeah, just missed it when typing. Now posted.

 

[kwhitelaw]

Nothing?
Good eye! Yeah, just missed it when typing. Now posted.

set me aside the 10mm, the 8mmx9mm combo, and the mac? green handled prybar..

got any hard handled SO screwdrivers separate from this assortment that would help get me over your minimum amount?

thanks

 

[knucklehead]

i'll take:
Vise Grip NEW 2 pack $13
small USA vicegrips $4
16mm combo $12
8mm $12
crescent 15" adjustable $19
can you knock some bux off for qty. / shipping savings & take $50?

 

[back2class]

set me aside the 10mm, the 8mmx9mm combo, and the mac? green handled prybar..

got any hard handled SO screwdrivers separate from this assortment that would help get me over your minimum amount?

thanks

Not at this time, keep me posted if you find anything in that list that gives you that funny feeling.

 

[back2class]

i'll take:
Vise Grip NEW 2 pack $13
small USA vicegrips $4
16mm combo $12
8mm $12
crescent 15" adjustable $19
can you knock some bux off for qty. / shipping savings & take $50?

Split? $55 and there yours as well as the flare wrench holder that didn't fit in the snall flat rate I sent them in.

 

[kwhitelaw]

Not at this time, keep me posted if you find anything in that list that gives you that funny feeling.

12mm impact 3/dr. $3
10mm semi deep 1/4"dr.tm408 $3

I'll take the 12mm, but I'm confused on the tm408? it says its a double square, but you have it as a 10mm?

either way, I'll take them both, along with the 2 wrenches and the prybar..

I think that gets me to the minimum... let me know, along with a total and paypal address, and i'll send it over in the morning..

thanks!

kevin

 

[Even 11]

Interested in the following, PM inbound on these and a few unlisted pieces.

7/16 IMPACT socket $3
1-1/16 sprl434 huge impact socket. $7
red pick $5
2 Popular Mechanics ratchets. FREE!!!
Craftsman 1/4" SOCKET driver $3
SK 1/4" SOCKET driver $3
Mac Pick $4
husky usa sae 1/4"dr socket set $2
Crescent laminated red handle water pump pliers $9 for the pair
SK branded 8" vise grips $6
wright 1/2dr. 11" extension $6

Thanks!
-Dane

 

[back2class]

12mm impact 3/dr. $3
10mm semi deep 1/4"dr.tm408 $3

I'll take the 12mm, but I'm confused on the tm408? it says its a double square, but you have it as a 10mm?

either way, I'll take them both, along with the 2 wrenches and the prybar..

I think that gets me to the minimum... let me know, along with a total and paypal address, and i'll send it over in the morning..

thanks!

kevin

another typo. Two seperate sockets.
One is a 10mm semi deep in 1/4" dr. and the other is a 1/4" drive 1/4" 8pt. Which one ya want?

 

[kwhitelaw]

another typo. Two seperate sockets.
One is a 10mm semi deep in 1/4" dr. and the other is a 1/4" drive 1/4" 8pt. Which one ya want?

10mm semi deep is what I was hoping it was.

cool beans!

 

[Even 11]

Add these 2 please...

I think a Snap-on torx driver but no markings $2
Stanley screwdrivers Free

-Dane

 

[back2class]

10mm semi deep is what I was hoping it was.

cool beans!

GOT U DOWN FOR THE 10mm, the 8mmx9mm combo, green handled prybar, 12mm impact 3/dr. $3 and the 10mm semi deep 1/4" $3

Is this correct?

 

[kwhitelaw]

GOT U DOWN FOR THE 10mm, the 8mmx9mm combo, green handled prybar, 12mm impact 3/dr. $3 and the 10mm semi deep 1/4" $3

Is this correct?

yep, shipped to 22193.

 

[1stwarrior95]

2 bore guages, Starrett I think $4 for both

fx2 extension excelent $6

10mm semi deep 1/4"dr.tm408 $3

Next
Import socket accessories. Some are very good quality, none are what I would call ****. THE 1/4 RATCHET IS JAMMED BUT THE 3/8 APPEARS TO BE DANAHER. what you see is what you get. $20
2 Popular Mechanics ratchets. FREE!!!

matco 8" 3/8 drive extension $10

I'd take the above quoted items if any/all are still available. LMK

 

[back2class]

I'd take the above quoted items if any/all are still available. LMK

these are now yours!!!! The others were already gone.

2 bore guages, Starrett I think $4 for both

fx2 extension excelent $6

matco 8" 3/8 drive extension $10


I will mark them as spoken for by you.

 

[1stwarrior95]

First pic
2 bore guages, Starrett I think $4 for both (spoken for 1stwarior95)


Pic 2, 3 and 4

fx2 extension excelent $6 (spoken for 1stwarior95)

challenger 1-1/16 $4

Craftsman 1-1/4 $12

matco 8" 3/8 drive extension $10 (spoken for 1stwarior95)

Ok, updated my want list if the 2 big wrenches are available.

 

[eddyyy302]

I will take this stuff pending a package price:
red pick $5 (I called dibs on in post 4)
Import torx set, 2 are broken..popular mechanics..actually not bad stuff. $3
Snappy rubber grip screwdrivers, some are prettu good and some rough $9 each (post 4)
pair of long reach Sunnex pliers, one is a little loose. $9 for the pair (post 4)

I would like to know what the brands of these are:
oil filter wrenches $1 each


Thanks,
Dan