To avoid these ads, REGISTER NOW!

semi virgin material- my twincar space.

dezaster

Member
Joined
Jan 25, 2007
Messages
6
hi, im dez, found this place though the HAMB.
now, firstly let me say in the uk we just dont seem to have garages like you guys stateside do!
over here, it considered pretty unusual for a house to come with a garage of this size- most houses have a small single 14x9 or thereabouts, or no garage at all, just enough drive space to park on.
so i was understandably chuffed we our cottage came with a 16.5x14.5 garage on the side, with enough drive space for 6 cars :D

our cottage is a C18th farmworkers cottage, brick built with a mansard roof. the garage has been built to match. unfortunately it was never finished as they guy who renovated the cottage and built the garage got killed in an accident digging the cesspit.:(

the garage has the brickwork completed, but the eves were not enclosed. the garge door frame had been ripped off by someone breaking into it when the house stood empty for 12 years. the door and frame are reusable though with minor work. there is a big crack up the back wall caused by minor subsidence, but its been checked out and im told im ok to leave it as-is as it wont drop any further. the roof tiles havent been set at the eves and theres no ridge tiles on. the electrics do work but need attention, and the floor is cracked by the roots of the brambles that were growing inside.
it was also stacked to the roof with old furniture, abandonded car parts, loads of old solvents, paint, etc, wet plaster board, carpet, and laods of other rubbish.

heres a pic of what it was like when we moved in, i had to spend a day clearing the drive of brambles to get into it!!
EPSN2323.jpg


since then ive boarded in the eves with OSB to keep the weather out, and that will then have felt and shiplat over it. ive also removed the garge door and remade the frame, and its now ready to reattach.
 
To avoid these ads, REGISTER NOW!
OP
D

dezaster

Member
Joined
Jan 25, 2007
Messages
6
i have fairly big plans for this place, as its going to house my '28 model A sedan, and one of my other 6 cars on rotation depending on which one im working on.

once the door is reattached, ile finish the roof, set the edge tiles, put the ridges on (theyre stacked up round the back of the garage) and put the felt and shiplatting over the OSB on the eves. then after i fit fascias, soffits and guttering, the outside will be weatherproof. the other other thing i plan to do externally is swap over the location of the window and the side door. the door is currently on the left wall, but opens out onto our boundary which is on a field, whereas the window overlooks the garden. for reasons of security and practicality, id prefer the window overlooking the field and the side door going into the garden.

internally, i plan to have as few shelves and workbenches as possible, to maximise space and help keep it tidy. i plan to have a single shelf 1' down from the rafters for boxes of stuff all the way round, and a single 30" deep workbench at the back with my 200l compressor under it, with my floorstanding drill press at one end and and my breadroller at the other.
the design of the roof offers a lot of storage space, so i will have a false ceiling with the square space in the middle boarding out for storage. it will also allow me to fully insulate the roof to keep it toasty in there so i can work in there all year round. i prefer to rack my tools on the walls rather than have toolchests, so i wont need a space for a stacker.
also all my 40s/50s garge memrobilia and signage will be put up on the walls.

progress wont be too quick on this, as i have to do it in and around working on the house, but i hope to have it usable by the end of feb.
 
OP
D

dezaster

Member
Joined
Jan 25, 2007
Messages
6
will do :)

im doing this thread for my own benefit more than anyone elses, to keep track of how its going/keep me focused. the before/after pics will certanly help.
 

Inetmonkey

Well-known member
Joined
Sep 18, 2006
Messages
106
Location
San Jose, CA
Jolly good old chum! How about posting some of the intermediate pics? I can't wait to see more of it. Also, is that a dog in your photo? Are you using him to scout ahead in the brambles? ;)
 

DynoDave

Well-known member
Joined
Mar 25, 2005
Messages
1,685
Location
Michigan
Cool project Dezaster. That will be a nice space when you are done. I see by the first photo that you already brought in the guard dog to secure the property!

Where are you at?
 
OP
D

dezaster

Member
Joined
Jan 25, 2007
Messages
6
Inetmonkey said:
Jolly good old chum! How about posting some of the intermediate pics? I can't wait to see more of it. Also, is that a dog in your photo? Are you using him to scout ahead in the brambles? ;)


yeah, thats our jack russel molly 'investing the situation' for me :wtf:

thsnkd for the kind words everyone, ile hopefully have some pics up of what ive managed so far, i tried to take some today but my camera batteries crapped out and ive lost the charger.

it appears the area where in is pretty nice, its farmworkers cottages on the end of the farm lane, so not too close ot anyone the village is a mile away and we only have 2 neighbours. its a very rural location.
 
To avoid these ads, REGISTER NOW!

wrigh003

Well-known member
Joined
Mar 27, 2006
Messages
783
Location
Birmingham, AL
That's great. Best of luck on bringing that place back to life- was just the garage let go, or was/is hte house in equal need of attention?

Post up lots of in-progress pictures. I, for one, would love to see that process.
 
OP
D

dezaster

Member
Joined
Jan 25, 2007
Messages
6
the house wasnt actually far off ok, even after standing empty for 12 years. a few loose tiles, a little damp, blocked gutters and rotten fascias. not a lot really.

the garden and drive were terrible, i had to spend time on them just to get to the garage.

ive done more on the garage-
rehung the door frame after squaring it up, and rehung the door.
found the key as well after 3 weeks of going through boxes of keys.
finished blocking in and boarding the eves.
full plasterboard ceiling.
bench. 2"x4" frame, 2'x8', 6 legs, mid hieght shelf level, 5x 4 inch screws per joint, top is 2 layers of 3/4" ply glued together making it a 1-1/2" slab. frame is made an inch narrower so if i spill something on the bench it doesnt drip onto the shelf below. vice mounted on the corner, with shelving above.
ive now been moving my tools and parts in and organising them, i prefer to have everything hanging up in its correct place, i dont get on with toolboxes. i can see if anythnigs gone missing too.

more pics once its tidied, painted, my vintage garage signs and stuff up, and everything racked up neatly.

EPSN2515-1.jpg


EPSN2514.jpg


then the next job is to remove the door from behind the welder, and swop it for the window thats on the opposite wall, so the window is south facing for maximium natural light, and the door opens into the back garden.
 

Morrisman

Well-known member
Joined
Nov 7, 2006
Messages
424
Location
Angeles City, Philippines
dezaster said:
the house wasnt actually far off ok, even after standing empty for 12 years. a few loose tiles, a little damp, blocked gutters and rotten fascias. not a lot really.

Typical hot rodder: gotta get the garage sorted out before the house :bounce:

I didn't know you'd joined Dez. I'm Paul B off the UK hotrods group. Welcome aboard.
 

Der Bugmeister

Well-known member
Joined
Dec 29, 2005
Messages
445
russlaferrera said:
It is starting to shape up. I love the brick wall. Build another garage and make this one your office. It's too nice for a garage...russ

Blasphemer!

Nothing is 'too nice for a garage'! :shocking:
 
OP
D

dezaster

Member
Joined
Jan 25, 2007
Messages
6
Morrisman said:
Typical hot rodder: gotta get the garage sorted out before the house :bounce:

I didn't know you'd joined Dez. I'm Paul B off the UK hotrods group. Welcome aboard.

too right!!!

and as youll know, ive got beyond sorting the garage to building my A! :bounce:

for the guys who mentioned the brick- i was going to paint it white but leave it unplasterd, but im now considering leaving it bare and just sealing it.
what i will do doing is working on all the 'bright' wood thats there, as i dont like it. the shelves and workbench will be stained and waxed, and have edging made from old floorboards added to strengthen them and hide the fact theyre ply. i want this place to look like an old workshop, not a new build.
 
Last edited:

rotus7

Well-known member
Joined
Apr 30, 2005
Messages
180
Location
NW AR
Definately don't paint that brick! It gives your shop character and it would not look like an old shop like you want.
 
To avoid these ads, REGISTER NOW!
Top Bottom