senlow
Well-known member
- Location
- Colorado
- Price
- Varies
There are no owner’s marks, unless specified in description.
I will entertain offers.
I'm always up for mutually beneficial trades.
Prices do not include shipping.
Pneumatic filters, and lubricators. Some are new, and some are used. All used units have been tested. I have priced the new units at about 1/3 of retail, and the used at about 1/4.
Wilkerson L28-06-LK00 Lubricator, 150 max PSI, 3/4NPT, this unit was assembled in a system, but never used, $28.
Unknown brand (If I remember correctly, it was bought from the Matco dealer) Filter, 150 max PSI, 3/8NPT, Used, $8.
Bridgeport Brass 750/300 Filter, 150 max PSI, 1/4NPT, Used, $12.
Rockwell ½” Pneumatic Air Drill. It is in very good condition. There are NO owners marks on it. The chuck has been upgraded to a Jacobs 33B heavy duty chuck, and does come with a chuck key. $45 Sold to DragPack69
Vintage Hex Drive Socket Set
For sale is a ½” hex drive socket set. It’s in great condition. I’m not sure of the manufacturer. It includes a drive handle, a female hex drive ratchet with the plug, and a ½” square drive adaptor. The sockets are: 7/16, ½, 9/16, 5/8, 11/16, ¾, 7/8 and 15/16. They have been ultrasonically cleaned. Otherwise they are as found. $12.
Next up is a lot of hex drive stuff. In 1/2” hex drive there is: 13mm, ½, 5/8, 11/16, ¾, and two 15/16. In 5/16” hex drive there is: a spinner handle, 4” extension, and a 3/8” socket. In ¼” hex drive there is: a Sears Spinner handle, 5/16, 3/8 and 7/16 sockets. $6.
Combination Wrenches
Wright 19 mm combination wrench. I have three available. They are in very good used condition. These wrenches were made in USA. There’s a small ding on the open end of them. $9 each
Duro Chrome 13/16” combination wrench, P/N 3326. I have ten available. These are new old stock. They do have some shelf wear. Duro Chrome was the top of Indestro’s line of tools. These wrenches were made in USA. $6 each
Duro Chrome 11/16” combination wrench. This wrench looks like it was used once or twice. It does have some shelf wear. $3
Duro Chrome 5/8” combination wrench. I have three available. These are new old stock. They do have some shelf wear. $5 each
Tuffy Screwdriver. It’s made by the Swallow Airplane Co., Inc. in Wichita, Kansas. The aluminum handle is kinda rough, and the tip has been ground. I would like to get $5. Sold to Airframer
Chevrolet 1979 Passenger Cars & Light Duty Truck Unit Repair Manual. This is the official factory manual, published in 1979. It’s in good condition. It has a tight, square binding. The pages are clean and clear. There are no inscriptions. The book has some shelf wear. There is minor damage to the back cover. The book covers unit repair (overhaul) for air conditioning compressor, steering, rear axle, front wheel drive, brakes, automatic transmission, manual transmission, clutch and transfer case. $10
Prices do not include shipping.
I will also trade for the following (or let me know what you have):
AT&G Screwdrivers
Diamond Calk & Horseshoe adjustable wrenches and pliers with green handles.
SK pliers with green handles.
Craftsman Professional combination wrenches, 1” and up. These must be made by SK. The beam is thicker than current Craftsman Pro wrenches. It looks almost like a longer polished version of the dreaded raised panel wrench. There is a “K” stamped into the beam to specify the manufacturer.
Wards Master Quality offset box end wrenches. I have 19/32-11/16, 5/8-11/16, and 15/16-1. I’m looking to complete this set. I prefer that these be in excellent condition, but will consider others.
1-1/8" Service Wrench
NOGA Magnetic Base and Arm (or Arm only)
Small Magnetic Chuck
VDO Tire Pressure Gauge
Knipex Pliers Wrench (any size)
Interesting ¼” drive Ratchets
German tools – Hazet, Stahlwille, Elora, Gedore, Dowidat etc.
Snap-on:
Green SDDP63 Screwdriver, #3 Philips
Green or Blue Pliers
OEX8 ¼” Combination Wrench
TMM10 10mm Socket, 1/4 dr, Chrome, 6 pt
Metric High Performance Box End Wrenches
Trilobe handle Screwdrivers (especially ¼” flat tip and #4 Phillips)
Hard Handles
Spark Plug Socket, 18mm
PIT160 Impact Driver, ½”
I will entertain offers.
I'm always up for mutually beneficial trades.
Prices do not include shipping.
Pneumatic filters, and lubricators. Some are new, and some are used. All used units have been tested. I have priced the new units at about 1/3 of retail, and the used at about 1/4.
Wilkerson L28-06-LK00 Lubricator, 150 max PSI, 3/4NPT, this unit was assembled in a system, but never used, $28.
Unknown brand (If I remember correctly, it was bought from the Matco dealer) Filter, 150 max PSI, 3/8NPT, Used, $8.
Bridgeport Brass 750/300 Filter, 150 max PSI, 1/4NPT, Used, $12.
Rockwell ½” Pneumatic Air Drill. It is in very good condition. There are NO owners marks on it. The chuck has been upgraded to a Jacobs 33B heavy duty chuck, and does come with a chuck key. $45 Sold to DragPack69
Vintage Hex Drive Socket Set
For sale is a ½” hex drive socket set. It’s in great condition. I’m not sure of the manufacturer. It includes a drive handle, a female hex drive ratchet with the plug, and a ½” square drive adaptor. The sockets are: 7/16, ½, 9/16, 5/8, 11/16, ¾, 7/8 and 15/16. They have been ultrasonically cleaned. Otherwise they are as found. $12.
Next up is a lot of hex drive stuff. In 1/2” hex drive there is: 13mm, ½, 5/8, 11/16, ¾, and two 15/16. In 5/16” hex drive there is: a spinner handle, 4” extension, and a 3/8” socket. In ¼” hex drive there is: a Sears Spinner handle, 5/16, 3/8 and 7/16 sockets. $6.
Combination Wrenches
Wright 19 mm combination wrench. I have three available. They are in very good used condition. These wrenches were made in USA. There’s a small ding on the open end of them. $9 each
Duro Chrome 13/16” combination wrench, P/N 3326. I have ten available. These are new old stock. They do have some shelf wear. Duro Chrome was the top of Indestro’s line of tools. These wrenches were made in USA. $6 each
Duro Chrome 11/16” combination wrench. This wrench looks like it was used once or twice. It does have some shelf wear. $3
Duro Chrome 5/8” combination wrench. I have three available. These are new old stock. They do have some shelf wear. $5 each
Tuffy Screwdriver. It’s made by the Swallow Airplane Co., Inc. in Wichita, Kansas. The aluminum handle is kinda rough, and the tip has been ground. I would like to get $5. Sold to Airframer
Chevrolet 1979 Passenger Cars & Light Duty Truck Unit Repair Manual. This is the official factory manual, published in 1979. It’s in good condition. It has a tight, square binding. The pages are clean and clear. There are no inscriptions. The book has some shelf wear. There is minor damage to the back cover. The book covers unit repair (overhaul) for air conditioning compressor, steering, rear axle, front wheel drive, brakes, automatic transmission, manual transmission, clutch and transfer case. $10
Prices do not include shipping.
I will also trade for the following (or let me know what you have):
AT&G Screwdrivers
Diamond Calk & Horseshoe adjustable wrenches and pliers with green handles.
SK pliers with green handles.
Craftsman Professional combination wrenches, 1” and up. These must be made by SK. The beam is thicker than current Craftsman Pro wrenches. It looks almost like a longer polished version of the dreaded raised panel wrench. There is a “K” stamped into the beam to specify the manufacturer.
Wards Master Quality offset box end wrenches. I have 19/32-11/16, 5/8-11/16, and 15/16-1. I’m looking to complete this set. I prefer that these be in excellent condition, but will consider others.
1-1/8" Service Wrench
NOGA Magnetic Base and Arm (or Arm only)
Small Magnetic Chuck
VDO Tire Pressure Gauge
Knipex Pliers Wrench (any size)
Interesting ¼” drive Ratchets
German tools – Hazet, Stahlwille, Elora, Gedore, Dowidat etc.
Snap-on:
Green SDDP63 Screwdriver, #3 Philips
Green or Blue Pliers
OEX8 ¼” Combination Wrench
TMM10 10mm Socket, 1/4 dr, Chrome, 6 pt
Metric High Performance Box End Wrenches
Trilobe handle Screwdrivers (especially ¼” flat tip and #4 Phillips)
Hard Handles
Spark Plug Socket, 18mm
PIT160 Impact Driver, ½”
Last edited: