To avoid these ads, REGISTER NOW!

Shop Basics - The Over Looked Items

To avoid these ads, REGISTER NOW!

Verado1250

Well-known member
Joined
Feb 9, 2016
Messages
97
Zip lock bags. Lots of good suggestions and though I have many, I will be adding a few of these. One thing I have not seen that I use, is 3 different sizes of Zip lock bags. They come in handy for a lot of uses and if I need to write what the part/hardware is for, for later use, I don't have to try to figure it out.
 

atch

Well-known member
Joined
Apr 4, 2006
Messages
842
Location
Columbia, Missouri
I will be retired on 30 June 2021 I do not plan to plan nor look at a clock as time spent in my shops working on my projects is irrelevant :}


Here Here !!

Cypher
I've been retired for 6 years; took my watch off 1/2/2015 and haven't put it back on. HOWEVER, when sweetie says supper will be on the table at 5:30 I NEED to know when that is.
 

didit

Well-known member
Joined
Feb 11, 2020
Messages
892
Location
S.W. Ontario
I've been retired for 6 years; took my watch off 1/2/2015 and haven't put it back on. HOWEVER, when sweetie says supper will be on the table at 5:30 I NEED to know when that is.
The clock in my garage has the correct time half the time. When the time changes come in the spring and fall, I never get around to changing it. Hasn't been a problem yet and you can tell by looking at me I haven't been missing any meals.:)
 

cousin eddie

Well-known member
Joined
Mar 19, 2013
Messages
45
Location
western pa
+1 on not changing clock. a mirror can be handy. sticky notes too. i would say camera, but phones and tablets take care of that. the ability to use the shop tv as an oversize computer monitor, so us old guys can see parts diagrams we google.
 

jrevans

Well-known member
Joined
Jun 29, 2009
Messages
78
Lighted magnifier- Wife laughed at me when I asked her to order one.

Caught her using it more than once.
 
OP
B

Bad Mojo

Well-known member
Joined
Sep 2, 2012
Messages
113
If you have welding tanks that aren't attached to a welder a tank rank that secures the tanks so they can't tip over.
 

HWgeek

Active member
Joined
Apr 25, 2008
Messages
37
I got an older husky bottom tool chest and fixed up the casters etc. Big bottom drawer and then 4 or 5 smaller depth ones. Typical lower tool box unit. Put a handle on one end. Now when I have a larger project, say motor rebuild, or reweld the trailer etc. (yes a welding cart is okay too) I can load up the tool chest with all the tools I need, it has a top for a mini work bench.
I actually don't currently have a workbench in our park the cars garage (yes I know, WTF. but.... it is what it is right now) So by using the rolling cart I can do a project at the location needed, then when done, put all the tools back into their locations.
It never stays loaded with tools, and if I need to start a new project, helps force me to finish the current one.

Several portable B&D work benches to use as extra space, hands etc.

Wax pencils to mark oily car parts.
 

LeonardY

Well-known member
Joined
Apr 16, 2011
Messages
5,020
Location
Southern California
Lighted magnifier- Wife laughed at me when I asked her to order one.

Caught her using it more than once.
As younger guys, we used to laugh at the older guys that had them mounted to their benches. One day we looked around and found we were the guys with the magnifier lamps. :oops: Although, we all laughed at ourselves.

My grandfather always had a magnifier at his desk. When he passed, mom asked what I would like that was his. I said the magnifier. It's on my desk now and gets used regularly.

BTW. A white board mounted to the door going into the house. That's where I write down the stuff I need to remember to get and do.
 

67CarGuy

Well-known member
Joined
Feb 6, 2008
Messages
763
Location
Outside Boston, MA
Perhaps two things not mentioned. 1) Clean storage for manuals, receipts, and so forth. 2) Trays for small parts during disassembly. I use old cooking tinware -- cookie sheets, bread tins, pie tins -- or old Tupperware with lids.
I strongly recommend a 3-ring binder for keeping manuals, etc. safely stored and accessible. Get a box of plastic sheet protectors from your local office supply store, and you can file everything you need to keep. And if you get a larger binder (3+" wide/tall), you may have enough room to add some blank, lined, and/or graph paper for doodles, schematics, designs, and whatnot.
 

bwringer

Well-known member
Joined
Jan 1, 2013
Messages
10,242
Location
Indianapolis
Another one: a box of disposable "puppy pads" or "incontinence pads". I bought a box of 100 of these at Costco a few months ago, and they're incredibly flippin' handy for any little project that might get messy, or for stuff like storing chainsaws that always drool chain oil.
 

LS6 Tommy

Well-known member
Joined
Dec 27, 2013
Messages
26,162
Location
Northern NJ
Another one: a box of disposable "puppy pads" or "incontinence pads". I bought a box of 100 of these at Costco a few months ago, and they're incredibly flippin' handy for any little project that might get messy, or for stuff like storing chainsaws that always drool chain oil.
Great idea! Putting wee wee pads under my chainsaw storage "pan" and under my grease guns ASAP.

Tommy
 

Alchase

Well-known member
Joined
Jan 2, 2016
Messages
187
Location
Harrah, Oklahoma
OK, I have two more,
One a small white board and marker.
I have mine mounted above my work bench and use it to write down all my Honeydos, and wanttodos.

Two is 5 mil nitrile gloves!
Used for anything with paint or stain, grease, etc…

At the start of the pandemic I heard there was a shortage of nitrile gloves coming.
I bought four boxes of Black Widow Venom gloves. I still have 3 3/4 boxes.
LOL
 

Swanny1953

ALLIANCE MEMBER
Joined
Jul 28, 2010
Messages
1,050
Location
Lucas, TX
A twist on the white board suggestion. I have 7 cars besides our dailies and have a small board where I track when each was last driven. Funny how 5-6 weeks or more can pass without getting one out of the garage for a little exercise.
 

Rusty Wrench

Well-known member
Joined
Aug 19, 2021
Messages
190
...1) Emergency Eye Wash station

(y)
Even if it's just a dedicated bottle of water.

Most of my shop accidents don't go beyond a few stitches or a lost fingernail.
But a few years back I had a chemical splash in both eyes. Blisteringly stupid and unforgettable in terms of pain and fear.
 
To avoid these ads, REGISTER NOW!

PugetDude

ALLIANCE MEMBER
Joined
Mar 13, 2013
Messages
22,261
Location
Superstition Mountains, AZ
Bench brush
Cordless blower
Magnetic trays
Clamps
More Clamps
White Pegboard (let the hatefest begin)
TubOTowels
Clipboard
A dozen tape measures scattered about
Mousetraps
Toilet paper
.357 Magnum
 

vetron

Well-known member
Joined
Sep 4, 2013
Messages
74
Location
Idaho
great thread. For mine i created a 'safety corner' near the main door. Eye pro, ear pro, Fire extinguisher, 1Aid Kit, both located where the shut off for power and gas was located(nat gas industrial type heater). Fire cabinet over there for solvents, etc. A friend's idea was to wire a light that was on when the compressor was on (it was way out back) so one never forgot to keep tabs on it.)
 
OP
B

Bad Mojo

Well-known member
Joined
Sep 2, 2012
Messages
113
great thread. For mine i created a 'safety corner' near the main door. Eye pro, ear pro, Fire extinguisher, 1Aid Kit, both located where the shut off for power and gas was located(nat gas industrial type heater). Fire cabinet over there for solvents, etc. A friend's idea was to wire a light that was on when the compressor was on (it was way out back) so one never forgot to keep tabs on it.)
How did you go about sizing your fire cabinet? I have been looking at them and they either seem tiny or more than I would ever need.
 

Jeff C

Well-known member
Joined
May 22, 2021
Messages
637
Location
Durham, NC
How did you go about sizing your fire cabinet? I have been looking at them and they either seem tiny or more than I would ever need.
I have one 44”x44” with one shelf and it filled up quickly. The shelf is full of various aerosol cans and quarts of oil. The floor holds various 5 quart and gallon jugs and a couple 2.5 gallon gas cans. Only room left would be to add another shelf at the very top to lay down grease cartridges or something similar. That all being said it holds everything I use for basic maintenance on a couple daily drivers, a lawn mower, a farm tractor and a chainsaw but doesn’t leave much room to spare. I wouldn’t consider anything smaller unless you’re only keeping aerosol cans in it.
 

vetron

Well-known member
Joined
Sep 4, 2013
Messages
74
Location
Idaho
How did you go about sizing your fire cabinet? I have been looking at them and they either seem tiny or more than I would ever need.
just went with the only fire cabinet i had which was probably too big ha
 

Metal-Marc

Well-known member
Joined
Aug 31, 2009
Messages
7,124
Location
Foothills of the Adirondacks
The clock in my garage has the correct time half the time. When the time changes come in the spring and fall, I never get around to changing it. Hasn't been a problem yet and you can tell by looking at me I haven't been missing any meals.:)

The clock in my garage is always showing the correct time to the second. It changes from EDT to EST automatically.

https://www.amazon.ca/dp/B01CCHXTE2/?tag=atomicindus04-20
 

like2wheel

Well-known member
Joined
Oct 29, 2014
Messages
1,693
Location
On an as needed basis
Last winter I picked up a small bug zapper for cheap at a liquidation place. Thought I might hang it up in the gazebo, but wife vetoed it.
Hung it in my shop, now I would never be without one in the summer.
 
OP
B

Bad Mojo

Well-known member
Joined
Sep 2, 2012
Messages
113
I seem to relearn this every couple of years, but having a couple moving dollies around goes really far when either a new tool comes in or some arranging of tools is occurring.
 
To avoid these ads, REGISTER NOW!
Top Bottom